|
|
|
|
|
| Decorative Ceiling Catalogue |
 |
Telma - Urethane Stair Bracket Right - #SB10X07TE-R : USD19.82
With the beauty of original and historical styles, decorative stair brackets add the finishing touch to stair systems. Manufactured from a high density urethane foam, they hold the same type of density and detail as traditional plaster stair bracket products. They come factory primed and can be easily installed using standard finishing nails and/or polyurethane construction adhesive. Adds the finishing touch to stair systems Based of original and historical designs Can be cut, drilled, screwed, or glued Factory primed and ready for paint or faux finish Solid urethane for maximum durability and detail Can be used on the interior or exterior |
|
|
 |
Swindon - Urethane Panel Moulding 94-1/2 in x 1-1/2 in x 1/2 in - #CHA01X00SW : USD12.74
Can be cut, drilled, screwed, or nailed Similar density to that of pine Beautiful details and design Factory primed and ready for paint Can be painted or faux finished Lightweight for easy installation |
|
|
 |
South Beach - MirroFlex - Ceiling Tiles Pack : USD86.78
South Beach - Mirroflex - Ceiling Tiles Pack |
|
|
 |
Shakuras - Urethane Ceiling Medallion 9 in x 1-3/8 in - #CM09SH : USD21.11
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Odessa Extra Large - Urethane Corbel - #COR03X05X27OD : USD63.76
These corbels are truly unique in design and function. Primarily used in decorative applications urethane corbels can make a dramatic difference in kitchens, bathrooms, entryways, fireplace surrounds, and more. This material is also perfect for exterior applications. It will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. With these corbels, you are only limited by your imagination. Can support up to 20lbs with proper installation Can be cut, drilled, glued, or screwed Factory primed and ready for paint or faux finish Can be used on the interior or exterior High Density urethane for maximum durability and detail Modeled after original historical patterns and designs |
|
|
 |
Titus - Urethane Crown Moulding - 94-1/2 in x 7-1/2 in x 11-7/8 in : USD135.89
Beautiful crown moulding is a great way to separate and define each room. With each design modeled after traditional plaster type mouldings, our lightweight polyurethane mouldings give the same rich detail, yet at a fraction of the cost. Most moulding profiles can be partnered with our do-it-yourself corner blocks that means no miter cutting for you, and most rooms can be completed in ours instead of days. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Soho - Tin Ceiling Tile by Shanko - #304 : USD10.72
Soho - Tin Ceiling Tile by Shanko - #304 Sample of Acoustical Option |
|
|
 |
Poppy - Tin Ceiling Tile by Shanko - #306 : USD10.72
Poppy - Tin Ceiling Tile by Shanko - #306 Sample of Acoustical Option |
|
|
 |
Spring Dreams - FAD Hand Painted Ceiling Medallion 30 in - #CCMF-111 : USD550.85
Spring Dreams - FAD Hand Painted Ceiling Medallion 30 in - #CCMF-111 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Sahara Vertical MirroFlex 4x8 / 4x10 Glue Up PVC 3D Wall Panels : USD184.01
Sahara Vertical MirroFlex 4x8 / 4x10 Glue Up PVC 3DWall Panels Project Showcase 124-5001-SAHAVERT - Travertine Installed in Retail Store 124-5001-SAHAVERT - Crosshatch Silver Installed in Living and Dining |
|
|
 |
Melonie - Urethane Ceiling Medallion 16 in x 3-5/8 in x 3/4 in - #CM16ML : USD32.57
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Middlesborough Egg and Dart - Urethane Ceiling Ring - #CR34MD : USD11.33
Ceiling rings are often used in conjunction with ceiling medallions in highlighting focal points like chandeliers and ceiling fans.However, ceiling rings can also be used on the wall to accent mirrors, photos and photo frames. Accent your ceilings with beautiful ceiling rings Perfect addition to highlight ceiling medallions Factory primed and ready for paint or faux finish High Density urethane for maximum durability and detail Can be cut, drilled, glued, or screwed Modeled after original historical patterns and designs |
|
|
 |
Gael - Tin Ceiling Tile by Shanko - #540 : USD10.72
Gael - Tin Ceiling Tile by Shanko - #540 Sample of Acoustical Option Project Showcase SK540 - Antique Rustic Black Installed in Living and Dining SK540 - White Installed in Bedroom |
|
|
 |
Laurel Wreath - Faux Tin Ceiling Tile - #210 : USD13.99
Can be use as drop-in ceiling tile or as a glue-up ceiling tile in commercial and residential applications. PVC 24" x 24" - 24" x 48" Pattern Size : 24" Design Depth is: 20 mm (0.79") Tin Look & No Metal Echo! Easy Glue Up / Drop In Installation Cuts With Scissors Affordable Will Not Rust Light Weight Delivery Time (3-14 business days) Download Fire Rating Class "A" Certificate Section Details Click to View Larger Project Showcase 210 - Brushed Brass Installed in Living and Dining 210 - Antique Copper Installed in Living and Dining 210 - White Matte Installed in Office 210 - White Pearl Installed in Restaurant 210 - Antique Copper Installed in Basement / Man Cave 210 - Antique Copper Installed in Beauty Salon / Barbershop 210 - Brushed Brass Installed in Living and Dining 210 - White Pearl Installed in Entrance / Foyer 210 - White Pearl Installed in Living and Dining 210 - Antique Silver Installed in Restaurant 210 - White Pearl Installed in Restaurant 210 - White Pearl Installed in Basement / Man Cave 210 - Antique Brass Installed in Living and Dining Return Policy Made to order in India. Returns are not allowed. Consider ordering samples first to check quality and finish. View stock items for faster delivery at a discounted price and also the ability to return them within 30 days. Color Disclaimer The image may not reflect current shade of our tiles. There is a difference in shade from batch to batch and we do not guarantee that the colors will match. We strongly recommend ordering the entire quantity with overages in one order. If you are trying to match an old order, please send images before placing an order. Please order a sample to get current color. |
|
|
 |
Larkspur - Powder Coated - Tin Ceiling Tile by Shanko - #506 : USD19.99
Larkspur - Powder Coated - Tin Ceiling Tile by Shanko - #506 Sample of Acoustical Option |
|
|
 |
Renaissance - Tin Ceiling Tile by Shanko -24"x24" - #512 : USD10.72
Renaissance - Tin Ceiling Tile by Shanko - 24"x24" - #512 Sample of Acoustical Option |
|
|
 |
Small Waltz Wall - Urethane Niche Surface Mount - #NCH21X33WA : USD214.40
Niches have been used in homes for almost 2000 years, first made of white marble in Nero's home. Most niches are still white, and for many years were mostly made of plaster. Now that many modern architectural products are made of urethane, custom millwork and details such as recessed niches have become affordable for any home improvement project. Niches are distinctive architectural accents. Often used to display sculptures, vases, clocks, plants and flowers, niches are beautiful and functional details that add value to any home interior. They are often used in main hallways, dining rooms, foyers, and staircases. An important aspect of a niche is its ability to concentrate or disperse light, so its placement should be based on the availability of light, either sunlight or interior lighting fixtures. Ceiling accent lights are often added as a compliment above a niche. Niches made of urethane can be easy to install for anyone, simply cut a hole in the drywall and place the niche inside. These niches will also require little maintenance in the future, and offer beauty and value to your home for decades to come. The Architectural Depot offers niches in varying heights, widths, and depths to fit the scale of your home. Styles of niches vary as well, from unadorned styles to styles w(more...) Easy installation Made of durable urethane Niches display home accessories beautifully Niches are available in different patterns and sizes Adding a niche is an ideal home improvement project Niches are an excellent addition to your home |
|
|
 |
Quadro - MirroFlex - Luminous Ceilings Pack : USD121.92
Quadro - MirroFlex - Luminous Ceilings Pack |
|
|
 |
Stockport - Urethane Bracket - #BKT05X05X07ST : USD27.73
These brackets are truly unique in design and function. Primarily used in decorative applications urethane brackets can make a dramatic difference in kitchens, bathrooms, entryways, fireplace surrounds, and more. This material is also perfect for exterior applications. It will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. With these corbels, you are only limited by your imagination. Can support up to 20lbs with proper installation Can be cut, drilled, glued, or screwed Factory primed and ready for paint or faux finish Can be used on the interior or exterior High Density urethane for maximum durability and detail Modeled after original historical patterns and designs |
|
|
 |
Palmetto - Urethane Crown Moulding - 94-1/2 in x 4-5/8 in x 6 in : USD49.55
Beautiful crown moulding is a great way to separate and define each room. With each design modeled after traditional plaster type mouldings, our lightweight polyurethane mouldings give the same rich detail, yet at a fraction of the cost. Most moulding profiles can be partnered with our do-it-yourself corner blocks that means no miter cutting for you, and most rooms can be completed in ours instead of days. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Square 5 - MirroFlex - 24"x48" - Ceiling Tiles Pack : USD170.37
Square 5 - MirroFlex - 24"x48" - Ceiling Tiles Pack |
|
|
 |
Wakefield - Urethane Crown Moulding - 94-1/2 in x 5-1/8 in x 6 in : USD48.12
Beautiful crown moulding is a great way to separate and define each room. With each design modeled after traditional plaster type mouldings, our lightweight polyurethane mouldings give the same rich detail, yet at a fraction of the cost. Most moulding profiles can be partnered with our do-it-yourself corner blocks that means no miter cutting for you, and most rooms can be completed in ours instead of days. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Dumont - Powder Coated - Tin Ceiling Tile by Shanko - #300 : USD19.99
Dumont - Powder Coated - Tin Ceiling Tile by Shanko - #300 Sample of Acoustical Option |
|
|
 |
Stockport - Urethane Bracket - #BKT03X05X07ST : USD20.21
These brackets are truly unique in design and function. Primarily used in decorative applications urethane brackets can make a dramatic difference in kitchens, bathrooms, entryways, fireplace surrounds, and more. This material is also perfect for exterior applications. It will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. With these corbels, you are only limited by your imagination. Can support up to 20lbs with proper installation Can be cut, drilled, glued, or screwed Factory primed and ready for paint or faux finish Can be used on the interior or exterior High Density urethane for maximum durability and detail Modeled after original historical patterns and designs |
|
|
 |
Versailles - Urethane Crown Moulding - 94-1/2 in x 4 in x 5-7/8 in : USD39.64
Beautiful crown moulding is a great way to separate and define each room. With each design modeled after traditional plaster type mouldings, our lightweight polyurethane mouldings give the same rich detail, yet at a fraction of the cost. Most moulding profiles can be partnered with our do-it-yourself corner blocks that means no miter cutting for you, and most rooms can be completed in ours instead of days. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Glue-up Styrofoam Decorative Molding 1 in. Wide 6.5 ft. Long - #L-6 : USD4.99
Glue-up Styrofoam Decorative Molding 1 in. Wide 6.5 ft. Long - #L-6 |
|
|
 |
Glue-up Styrofoam Decorative Molding 2" Wide 3.7 ln. ft. Long - #L-5 : USD4.09
L-5 - Decorative Molding - 2" Wide 6.5 ln. ft. Long |
|
|
 |
Tirana - Urethane Ceiling Medallion 13-7/8 in x 3-3/4 in x 1-1/4 in - #CM13TI : USD27.72
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Traditional - Urethane Onlay - #ONL05X05TR : USD10.42
Our appliques and onlays are the perfect accent pieces to cabinetry, furniture, fireplace mantels, ceilings, and more. Each pattern is carefully crafted after traditional and historical designs. Each polyurethane piece is easily installed, just like wood pieces, with simple glues and finish nails. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Weave Horizontal MirroFlex 4x8 / 4x10 Glue Up PVC 3D Wall Panels : USD184.01
Weave Horizontal MirroFlex 4x8 / 4x10 Glue Up PVC 3DWall Panels Project Showcase 124-5001-WEAV - Pearwood Installed in Hospitality 124-5001-WEAV - Light Maple Installed in Hospitality 124-5001-WEAV - Welsh Cherry Installed in Living and Dining 124-5001-WEAV - Argent Bronze Installed in Living and Dining 124-5001-WEAV - Eccoflex Black Installed in Restaurant |
|
|
 |
Vaduz - Urethane Ceiling Medallion 23-1/2 in x 3-1/2 in x 2-1/8 in - #CM23VA : USD75.02
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Oxford Oak Leaf - Urethane Corbel - #COR03X05X01OX : USD18.66
These corbels are truly unique in design and function. Primarily used in decorative applications urethane corbels can make a dramatic difference in kitchens, bathrooms, entryways, fireplace surrounds, and more. This material is also perfect for exterior applications. It will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. With these corbels, you are only limited by your imagination. Can support up to 20lbs with proper installation Can be cut, drilled, glued, or screwed Factory primed and ready for paint or faux finish Can be used on the interior or exterior High Density urethane for maximum durability and detail Modeled after original historical patterns and designs |
|
|
 |
Revolution - MirroFlex - Light Diffusion Pack : USD120.42
Revolution - MirroFlex - Light Diffusion Pack |
|
|
 |
Stockport - Urethane Crown Moulding - 94-1/2 in x 6-1/2 in x 9-1/4 in : USD135.89
Beautiful crown moulding is a great way to separate and define each room. With each design modeled after traditional plaster type mouldings, our lightweight polyurethane mouldings give the same rich detail, yet at a fraction of the cost. Most moulding profiles can be partnered with our do-it-yourself corner blocks that means no miter cutting for you, and most rooms can be completed in ours instead of days. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #574 : USD19.99
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #574 Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #235 : USD19.99
Shanko - Tin Plated Steel - Wall and Ceiling Patterns - #235 Sample of Acoustical Option |
|
|
 |
Marseille - Urethane Ceiling Medallion 16-1/8 in x 5/8 in - #CM16MA : USD38.21
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Faux Wood Beams - 5 ft. Length & 10 in. Width : USD171.02
Faux Wood Beams - 5 ft. Length & 10 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 4 ft. Length & 18 in. Width : USD200.06
Faux Wood Beams - 4 ft. Length & 18 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 5 ft. Length & 12 in. Width : USD210.52
Faux Wood Beams - 5 ft. Length & 12 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 5 ft. Length & 14 in. Width : USD174.71
Faux Wood Beams - 5 ft. Length & 14 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 5 ft. Length & 16 in. Width : USD190.60
Faux Wood Beams - 5 ft. Length & 16 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 4 ft. Length & 20 in. Width : USD215.44
Faux Wood Beams - 4 ft. Length & 20 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 5 ft. Length & 18 in. Width : USD222.26
Faux Wood Beams - 5 ft. Length & 18 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 4 ft. Length & 22 in. Width : USD230.79
Faux Wood Beams - 4 ft. Length & 22 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 4 ft. Length & 24 in. Width : USD246.21
Faux Wood Beams - 4 ft. Length & 24 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 4 ft. Length & 26 in. Width : USD261.61
Faux Wood Beams - 4 ft. Length & 26 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 4 ft. Length & 4 in. Width : USD91.21
Faux Wood Beams - 4 ft. Length & 4 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 4 ft. Length & 6 in. Width : USD106.40
Faux Wood Beams - 4 ft. Length & 6 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 6 ft. Length & 30 in. Width : USD353.57
Faux Wood Beams - 6 ft. Length & 30 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Faux Wood Beams - 7 ft. Length & 4 in. Width : USD159.62
Faux Wood Beams - 7 ft. Length & 4 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
County Cork - Shanko - Powder Coated - Tin Ceiling Tile - #509 : USD19.99
From a tiny country cottage to a classic pub, the SH509 County Cork decorative ceiling tile brings a wee bit o' the Emerald Isle into any living space or business. The burnished central flat square is surrounded by simple square borders and a wide swath of delicately hammered metal that brings to mind the soft mists of the Celtic countryside. When you see how beautiful our SH509 County Cork decorative ceiling tile makes your room look, sure and you'll be so happy that you'll be dancing a jig, so you will! All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Majestic - Shanko - Powder Coated - Tin Ceiling Tile - #500 : USD19.99
As handsome as the courageous and chivalrous knight after whom they are named, our skillfully engraved SH500 Majestic Shanko decorative ceiling tile is the perfect decoration to create the most beautiful ceilings, walls, or photo backdrops. This highly decorative tile features a large medallion filled with a beautiful latticework design and a central tiny four-petaled floral motif, topped off by feathery plumes of fleurs-de-lis in each corner. The SH500 Majestic Shanko decorative ceiling tile will create a room fit for a king—or knight! All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option Project Showcase SKPC500 - Gold Nugget Installed in Restaurant SKPC500 - Bronze Installed in Entrance / Foyer |
|
|
 |
Aly 17" Glue-up Styrofoam Ceiling Medallion K-27 : USD20.93
K-27 - 17" Ceiling Medallion |
|
|
 |
Sheridan Road - Shanko - Powder Coated - Tin - Ceiling Tile - #507 : USD19.99
Pay homage to the Roaring 20s with our SH507 Sheridan Road Shanko decorative ceiling tiles. This Art Deco style ceiling tile is the epitome of the hot jazz and the cool clubs that played host to them, like the infamous Green Mill on Chicago's North Side. With its deeply etched lines and sharp geometric triangles and diamonds that resemble the curtain of a classic stage, the SH507 Sheridan Road Shanko tile is sure to give your room a look that swings! All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #515 : USD19.99
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #504 : USD19.99
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #501 : USD19.99
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #5000 : USD19.99
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Romeo, Romeo - Shanko - Powder Coated - Tin Ceiling Tile - #502 : USD19.99
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. If you like Elizabethan-themed decor, you'll love our SH502 Romeo, Romeo Shanko decorative ceiling tile. With its intricately woven Tudor-style cross-hatch design surrounded by elegant scrolls, curves, and floral motifs, these beautiful tiles would look equally great decorating the ceiling of an intimate finished basement as it would in a bustling British-style inn or old-fashioned Irish pub. Like Shakespeare's classic play, our SH502 Romeo, Romeo Shanko decorative ceiling tile is timeless and enduring. Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #511 : USD19.99
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Williamsburg - Shanko - Powder Coated - Tin Ceiling Tile - #505 : USD19.99
If you're looking for a decorative ceiling tile that will give your room a clean, classic look, our SH505 Williamsburg tile is the perfect choice. Featuring a set of simple nested squares with both single and double lines, these tiles are a great fit for businesspersons, homeowners—really, anyone who wants to impress with a sophisticated, classic look. From colonial style to farmhouse or schoolhouse decors, the SH505 Williamsburg decorative ceiling tile will satisfy even the most discriminating decorators. All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Antoinette - Shanko - Powder Coated - Tin Ceiling Tile - #321 : USD19.99
It might not sound as if the sharp angles of squares would go well with leafy floral fleurs-de-lis motifs, but our SH321 Antoinette Shanko decorative ceiling tile defy convention by matching those two design elements. They say opposites attract, and that is perfectly true of these beautiful tiles whose seemingly opposite elements complement one another seamlessly. Perfect for French, English, and colonial decors, the SH321 Antoinette Shanko decorative ceiling tile adds a touch of elegance to any room. All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #310 : USD19.99
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Yucatan - Shanko - Powder Coated - Tin Ceiling Tile - #314 : USD19.99
Like the mysterious, dense jungle that surrounds the ancient pyramids of the Yucatan Peninsula, our deco-style SH314 Yucatan Shanko decorative ceiling tile adds layers of intrigue to any room. Panels of shiny stainless steel stacked high upon one another bring depth and dimension to your ceilings, and these striking tiles also make great decorations for wall decor and wet bars. Just imagine how amazing they'll look decorating your backyard tiki bar. If you're looking for a tile that's a little unusual, the SH314 Yucatan Shanko decorative ceiling tile will definitely take you off the beaten path to an intriguing new world! All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Clover - Powder Coated - Tin Ceiling Tile by Shanko - #203 : USD19.99
Clover - Powder Coated - Tin Ceiling Tile by Shanko - #203 Sample of Acoustical Option |
|
|
 |
Dumont - Tin Ceiling Tile by Shanko - 24"x24" - #300 : USD10.72
Dumont - Tin Ceiling Tile by Shanko - 24"x24" - #300 Sample of Acoustical Option |
|
|
 |
Flutterby - Shanko - Powder Coated - Tin - Ceiling Tile - #335 : USD19.99
Nothing evokes the sunny days of summer like butterflies hovering over a golden meadow. The nearly silent fluttering of their delicate wings barely stirs up a hint of a gentle breeze under the brilliant sun. Now you can evoke this feeling at any time of the year with our SH335 Flutterby Shanko decorative ceiling tile. From kitchens to bistros to garden centers, this beautiful tile and its dozens of lacy butterflies will bring a beautiful warm aura of summer to any room. All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #606 : USD19.99
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #517 : USD19.99
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. STEEL panels come UNFINISHED, and need to be treated with an OIL-BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear gloss enamel by Rustoleum. Sample of Acoustical Option |
|
|
 |
Americana - MirroFlex - Ceiling Tiles Pack : USD86.78
Americana - MirroFlex - Ceiling Tiles Pack |
|
|
 |
Arabic Caprice - FAD Hand Painted Ceiling Medallion 37 in- #CCMF-116 : USD688.85
Painted Ceiling Medallion 37 in - #CCMF-116 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Tritan BP - 48 in x 3 in x 3 in Faux Universal Outside Stone Corner - Nature's Spirit : USD60.31
The universal faux stone outside corner can be used with any of our panel products. The corner is designed to be butted up against the panel. |
|
|
 |
Genevieve - Urethane Ceiling Medallion 16-1/8 in x 3-1/2 in x 7/8 in - #CM16GN : USD39.64
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Raleigh - Shanko Aluminum Ceiling Tile - #523 : USD49.00
A feathery hammered metal border serves as a backdrop for four beautiful fleurs-de-lis motifs on our great SH523 Raleigh Shanko decorative ceiling tile. The central cross-hatch design is reminiscent of a Tudor-style house that first came to popularity in the Elizabethan England of the polite and refined Sir Walter Raleigh. That classic look makes the SH523 Raleigh Shanko decorative ceiling tile ideal for pubs, restaurants, and even wet bars. Sample of Acoustical Option |
|
|
 |
Southampton - Urethane Capital - #CAP10X03X02SO : USD28.17
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Rib 1 - MirroFlex - 24"x48" - Ceiling Tiles Pack : USD170.37
Rib 1 - MirroFlex - 24"x48" - Ceiling Tiles Pack |
|
|
 |
Swindon - Urethane Ceiling Medallion 16-7/8 in x 1-1/2 in - #CM16SW : USD33.82
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Artis Onlay - Urethane Capital - #CAP09X07X03AR : USD31.26
Our appliques and onlays are the perfect accent pieces to cabinetry, furniture, fireplace mantels, ceilings, and more. Each pattern is carefully crafted after traditional and historical designs. Each polyurethane piece is easily installed, just like wood pieces, with simple glues and finish nails. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Quatro Square - Urethane Ceiling Tile - 24"x24" - #CT24QA : USD117.51
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Arabic Caprice III - FAD Hand Painted Ceiling Medallion 37 in- #CCMF-116-3 : USD688.85
Arabic Caprice III - FAD Hand Painted Ceiling Medallion 37 in- #CCMF-116-3 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Shanko Aluminum Ceiling Tile - #311 : USD49.00
Shanko Aluminum Ceiling Tile - #311 All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Bradford Flower Urethane Casing Facia - 5-1/4 in x 1-3/8 in x 96-5/8 in : USD89.17
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from a high density urethane which gives each piece the unique details that mimic that of traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Federal - Urethane Ceiling Medallion 15-3/8 in x 3-5/8 in x 1 in - #CM15FE : USD37.99
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Small Classic - Urethane Ceiling Medallion 40-1/4 in x 3-1/8 in - #CM40CL : USD223.36
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Milan - Urethane Ceiling Medallion 47-5/8 in x 2-3/4 in - #CM47MI : USD473.91
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Alexandria Wall - Urethane Niche - #NCH16X30AL : USD272.08
Niches have been used in homes for almost 2000 years, first made of white marble in Nero's home. Most niches are still white, and for many years were mostly made of plaster. Now that many modern architectural products are made of urethane, custom millwork and details such as recessed niches have become affordable for any home improvement project. Niches are distinctive architectural accents. Often used to display sculptures, vases, clocks, plants and flowers, niches are beautiful and functional details that add value to any home interior. They are often used in main hallways, dining rooms, foyers, and staircases. An important aspect of a niche is its ability to concentrate or disperse light, so its placement should be based on the availability of light, either sunlight or interior lighting fixtures. Ceiling accent lights are often added as a compliment above a niche. Niches made of urethane can be easy to install for anyone, simply cut a hole in the drywall and place the niche inside. These niches will also require little maintenance in the future, and offer beauty and value to your home for decades to come. The Architectural Depot offers niches in varying heights, widths, and depths to fit the scale of your home. Styles of niches vary as well, from unadorned styles to styles w(more...) Easy installation Made of durable urethane Niches display home accessories beautifully Niches are available in different patterns and sizes Adding a niche is an ideal home improvement project Niches are an excellent addition to your home |
|
|
 |
Edwards Flower Urethane Casing Facia - 6-3/8 in x 2-1/4 in x 96-1/4 in : USD101.48
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from a high density urethane which gives each piece the unique details that mimic that of traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Classic Ionic Large Onlay - Urethane Capital - #CAP09X07X03RI : USD31.26
Our appliques and onlays are the perfect accent pieces to cabinetry, furniture, fireplace mantels, ceilings, and more. Each pattern is carefully crafted after traditional and historical designs. Each polyurethane piece is easily installed, just like wood pieces, with simple glues and finish nails. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Shell - Urethane Ceiling Tile - 24"x24" - #CT24X24SH : USD113.52
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Classic Ionic - Urethane Capital - #CAP08X07X02CL : USD42.32
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Adonis Wall - Urethane Niche - #NCH21X39AD : USD448.46
Niches have been used in homes for almost 2000 years, first made of white marble in Nero's home. Most niches are still white, and for many years were mostly made of plaster. Now that many modern architectural products are made of urethane, custom millwork and details such as recessed niches have become affordable for any home improvement project. Niches are distinctive architectural accents. Often used to display sculptures, vases, clocks, plants and flowers, niches are beautiful and functional details that add value to any home interior. They are often used in main hallways, dining rooms, foyers, and staircases. An important aspect of a niche is its ability to concentrate or disperse light, so its placement should be based on the availability of light, either sunlight or interior lighting fixtures. Ceiling accent lights are often added as a compliment above a niche. Niches made of urethane can be easy to install for anyone, simply cut a hole in the drywall and place the niche inside. These niches will also require little maintenance in the future, and offer beauty and value to your home for decades to come. The Architectural Depot offers niches in varying heights, widths, and depths to fit the scale of your home. Styles of niches vary as well, from unadorned styles to styles w(more...) Easy installation Made of durable urethane Niches display home accessories beautifully Niches are available in different patterns and sizes Adding a niche is an ideal home improvement project Niches are an excellent addition to your home |
|
|
 |
Cove Harvest - Urethane Crown Moulding - 94-1/2 in x 14-1/8 in x 21-5/8 in : USD251.97
Beautiful crown moulding is a great way to separate and define each room. With each design modeled after traditional plaster type mouldings, our lightweight polyurethane mouldings give the same rich detail, yet at a fraction of the cost. Most moulding profiles can be partnered with our do-it-yourself corner blocks that means no miter cutting for you, and most rooms can be completed in ours instead of days. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Faux Wood Beams - 8 ft. Length & 10 in. Width : USD273.64
Faux Wood Beams - 8 ft. Length & 10 in. Width Cast from natural wood beams with surface textures and wood-grain detail, faux wood ceiling beams perfectly duplicate natural wood. Made from high-density polyurethane foam (HDF), faux wood beams are easy and inexpensive to install, virtually maintenance free and can be used for interior or exterior applications. An optional fire-rated resin used in production is also available for beams designed for interior use. Beam Add-ons End CapOptions: 1 End Cap 2 End Caps Corbel EndOptions: Corbel End A Corbel End B Corbel End C Chamfer End Cap(Available upon request) Project Showcase Driftwood Installed in Living and Dining Sand Blast + Light Walnut Installed in Living and Dining Sand Blast + Light Walnut Installed in Kitchen Espresso Installed in Living and Dining Hand Hewn + Dark Walnut Installed in Living and Dining Sand Blast + Dark Walnut Installed in Kitchen Oak Installed in Living and Dining Installed in Living and Dining Gray Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining Espresso Installed in Living and Dining Doug Fir + Dark Walnut Installed in Living and Dining shippinginfodetails Leaving the Facility The majority of our items are shipped by ground service (FedEx, UPS), while beams and mantels longer than 8', or items that require pallets, are shipped by common carrier. Depending on the length and weight of the shipper and where the ship comes from, shipping costs can vary greatly. We notify you when we have received confirmation that your order has shipped, usually by email after getting this confirmation from the factory. Common carriers usually take a few additional days to deliver compared to FedEx / UPS shipments. We will notify you when your shipment is coming to the delivery terminal of the freight company. When a package is delivered: Damage happens from time to time, but it is rare. The shipment must be inspected carefully before being signed for. Your shipping confirmation will always include information about when you will receive your order. If you suspect a concealed damage, it is highly recommended that the packaging be opened prior to signing for the order. Having signed the acknowledgement of receipt, you will be released from any further liability if damage is found after the fact. The shipment may be rejected as a whole or only the damaged portion may be rejected. Please contact us immediately so we can reissue new copies. The driver must add a note that the shipment is damaged on the delivery receipt, and he must also sign the receipt if you discover it damaged, but choose to accept it anyway. Any part of your order is damaged, please contact the shipping company to file a claim. The trucking company's inspector will need all damaged merchandise and packaging material. Contact us right away if you would like to reorder. When the truck leaves you notice concealed damage: Even though the truck driver has already left and you signed for the package without looking at the product, you notice the damage after unpacking it. As it has been your responsibility since you signed for the load, we cannot process the claim on your behalf. For more information about contacting the carrier, feel free to contact us. This way, you can save all packaging materials and damaged merchandise for the trucking company's inspector. |
|
|
 |
Wigan - Urethane Ceiling Medallion 16 in x 2-1/4 in - #CM16WG : USD60.95
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Adonis - Urethane Ceiling Medallion 16-1/8 in x 3-5/8 in x 1 in - #CM16AD : USD40.91
Our ceiling medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines, and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, "plastic" type medallions. - Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. - Medallions are light weight for easy installation. - They are fully primed and ready for your paint. If you have any questions feel free to ask. These are in stock and available for immediate shipment. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Kent - Urethane Crown Moulding - 94-1/2 in x 2-1/2 in x 6-3/8 in : USD52.38
Beautiful crown moulding is a great way to separate and define each room. With each design modeled after traditional plaster type mouldings, our lightweight polyurethane mouldings give the same rich detail, yet at a fraction of the cost. Most moulding profiles can be partnered with our do-it-yourself corner blocks that means no miter cutting for you, and most rooms can be completed in ours instead of days. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Dentil - Urethane Crown Moulding - 94-1/2 in x 3-1/2 in x 5-5/8 in : USD49.55
Beautiful crown moulding is a great way to separate and define each room. With each design modeled after traditional plaster type mouldings, our lightweight polyurethane mouldings give the same rich detail, yet at a fraction of the cost. Most moulding profiles can be partnered with our do-it-yourself corner blocks that means no miter cutting for you, and most rooms can be completed in ours instead of days. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Metal Plates MirroFlex 4x8 Glue Up PVC 3D Wall Panels : USD184.01
Metal Plates MirroFlex 4x8 Glue Up PVC 3DWall Panels Project Showcase 124-5001-METALPLAT - Mirror Installed in Living and Dining 124-5001-METALPLAT - Mirror Gold Installed in Hospitality |
|
|
 |
Claremont - Urethane Panel Moulding 94-1/2 in x 1-3/4 in x 1/2 in - #PML01X00CL : USD14.15
Our beautiful panel moulding and corners add a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from a high density urethane which gives each piece the unique details that mimic that of traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. The best part is you can make your own shapes and sizes by simply cutting the moulding piece down to size, and then butting them up to the decorative corners. These are also commonly used for an inexpensive wainscot look. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Traditional - Urethane Corbel - #COR04X06X10TR : USD35.67
These brackets are truly unique in design and function. Primarily used in decorative applications urethane brackets can make a dramatic difference in kitchens, bathrooms, entryways, fireplace surrounds, and more. This material is also perfect for exterior applications. It will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. With these corbels, you are only limited by your imagination. Can support up to 20lbs with proper installation Can be cut, drilled, glued, or screwed Factory primed and ready for paint or faux finish Can be used on the interior or exterior High Density urethane for maximum durability and detail Modeled after original historical patterns and designs |
|
|
 |
Dome 2 - MirroFlex - Luminous Ceilings Pack : USD121.92
Dome 2 - MirroFlex - Luminous Ceilings Pack |
|
|
 |
Clara Glue-up Styrofoam Decorative Molding 2 in. Wide 6.5 ft. Long (Pack of 100 / 650 ln. ft.) - #L-5 : USD553.00
Clara Glue-up Styrofoam Decorative Molding 2 in. Wide 6.5 ft. Long (Pack of 100 / 650 ln. ft.) - #L-5 |
|
|
 |
Egg and Dart Fluted - Urethane Niche Surface Mount - #NCH27X42EG : USD490.10
Niches have been used in homes for almost 2000 years, first made of white marble in Nero's home. Most niches are still white, and for many years were mostly made of plaster. Now that many modern architectural products are made of urethane, custom millwork and details such as recessed niches have become affordable for any home improvement project. Niches are distinctive architectural accents. Often used to display sculptures, vases, clocks, plants and flowers, niches are beautiful and functional details that add value to any home interior. They are often used in main hallways, dining rooms, foyers, and staircases. An important aspect of a niche is its ability to concentrate or disperse light, so its placement should be based on the availability of light, either sunlight or interior lighting fixtures. Ceiling accent lights are often added as a compliment above a niche. Niches made of urethane can be easy to install for anyone, simply cut a hole in the drywall and place the niche inside. These niches will also require little maintenance in the future, and offer beauty and value to your home for decades to come. The Architectural Depot offers niches in varying heights, widths, and depths to fit the scale of your home. Styles of niches vary as well, from unadorned styles to styles w(more...) Easy installation Made of durable urethane Niches display home accessories beautifully Niches are available in different patterns and sizes Adding a niche is an ideal home improvement project Niches are an excellent addition to your home |
|
|
 |
Ashford Traditional Urethane Casing Facia - 9-1/8 in x 2-1/4 in x 97-1/4 in : USD103.34
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from a high density urethane which gives each piece the unique details that mimic that of traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Larkspur - Tin Ceiling Tile by Shanko - 24"x24" - #506 : USD10.72
Larkspur - Tin Ceiling Tile by Shanko - 24"x24" - #506 Sample of Acoustical Option |
|
|
 |
Edwards Shell Urethane Casing Facia - 9-5/8 in x 2-3/4 in x 96-1/2 in : USD104.48
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from a high density urethane which gives each piece the unique details that mimic that of traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Ashford Shell - Urethane Casing Facia - #CAS06X02AS : USD103.34
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from a high density urethane which gives each piece the unique details that mimic that of traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Smith Inside Corner - Urethane Crown Moulding Blocks - #MIC05X05SM : USD31.94
Crown moulding adds a beautiful finish to elegant rooms. To get this look you would simply hire a professional to figure out and install all of the complicated miter cuts. This made the cost of crown moulding more expensive as this method can be labor intesive. Not anymore. Our moulded inside and outside corners make installation a breeze. Say goodbye to miters with our DIY corners and couplers. Makes moulding installation a breeze Eliminates miter cuts A true DIY crown moulding installation Factory primed and ready for paint Can be painted or faux finished Lightweight for easy installation |
|
|
 |
Dawna Glue-up Styrofoam Decorative Molding 1 in. Wide 6.5 ft. Long (Pack of 265 / 1722.5 ln. ft.) - #L-6 : USD696.95
Dawna Glue-up Styrofoam Decorative Molding 1 in. Wide 6.5 ft. Long (Pack of 265 / 1722.5 ln. ft.) - #L-6 |
|
|
 |
Cornelia - Urethane Crown Moulding - 94-1/2 in x 3-3/8 in x 4-3/4 in : USD36.81
Beautiful crown moulding is a great way to separate and define each room. With each design modeled after traditional plaster type mouldings, our lightweight polyurethane mouldings give the same rich detail, yet at a fraction of the cost. Most moulding profiles can be partnered with our do-it-yourself corner blocks that means no miter cutting for you, and most rooms can be completed in ours instead of days. Another benefit of polyurethane is it will not rot or crack, and is impervious to insect manifestations. It comes to you factory primed and ready for your paint, faux finish, gel stain, marbleizing and more. Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Curves MirroFlex 4x8 / 4x10 Glue Up PVC 3D Wall Panels : USD184.01
Curves MirroFlex 4x8 / 4x10 Glue Up PVC 3DWall Panels |
|
|
 |
Brick MirroFlex 4x10 Glue Up PVC 3D Wall Panels : USD230.02
Download Technical Information Brick MirroFlex 4x10 Glue Up PVC 3DWall Panels |
|
|
 |
MirroFlex 3D Vinyl Beadboard Wall Paneling, 4x10 : USD230.02
About Our MirroFlex Vinyl Beadboard Ceiling and Wall Panels If you want to upgrade the style of your home but don't want to break the bank to do so, you should consider vinyl beadboard panels from Decorative Ceiling Tiles. Beadboard for walls was a popular design trend during the Victorian era, but even today, beadboard is still found in many homes and businesses because of its simple and attractive aesthetic. Vinyl beadboard panels are similar to more traditional paneling because of the distinctive groove pattern, but they're more affordable and easier to install. Order your wall or ceiling beadboard panels from us today to get a high-quality product at an affordable price! What Is Vinyl Beadboard, and What Are Its Benefits? Vinyl beadboard paneling gives you the look of beadboard in a more modern material. If you think about it, a lot of your home probably already uses vinyl in some form. Do you have vinyl windows or siding? Maybe you have vinyl porch posts, a vented soffit, or a vinyl railing. Vinyl is used in lots of places around the home, and it can mimic many different materials, so you might not even notice that it's there. Vinyl PVC beadboard can provide you with a more professional finish without painting. A PVC beadboard ceiling or wall panel can also provide a durable finish that is resistant to scratches and dents. It's water-resistant and rot-free, and it requires little to no maintenance to keep it looking its best. Vinyl beadboard ceiling or wall paneling also adds a bit of insulation to your home and protects surfaces from chair bumps and other damage. Can You Paint Vinyl Beadboard? Yes! Most vinyl beadboard comes in a white or cappuccino color, but you can paint vinyl beadboard panels any color you wish. Be sure to start with a good-quality acrylic primer to help the vinyl surface accept the paint better. Use an angled trim brush to apply the primer to the wall edges, and then apply the primer to the broader areas using a roller. If you have existing vinyl beadboard panels installed but want to boost your curb appeal, painting yourwall panelscan be a lot less expensive than replacing them. How to Use Vinyl Beadboard Around the Home Vinyl beadboard panels are typically installed vertically on walls, creating the look of traditional striped paneling, but some people have begun to install vinyl beadboards horizontally for a unique look. Many people use PVC beadboard panels for walls in their dining and laundry rooms. Cover up old plaster that has unsightly cracks and blemishes with vinyl beadboard panels. You can also use these wall panels to cover up popcorn ceilings and create a more appealing visual texture that pulls the eye upward. Vinyl beadboard panels or solid soffit material can be used to create a finished vinyl beadboard ceiling on your porch. Using vinyl beadboard to create a chair rail adds a polished look to a space that can help to tie everything together. Installing Vinyl Beadboard Walls You don't need to be an expert to install vinyl beadboard panels on your own. In fact, it can prove to be a fun DIY project. All you need are some basic tools and know-how. Beadboard wall paneling can easily be installed over your existing drywall with a good panel adhesive like Liquid Nails. While the adhesive cures, you can also use brads or nails to temporarily hold the panels in place. If you install vinyl beadboard in your kitchen or bathroom, make sure the paneling and molding adhesive you use is water-resistant. You should also nail each panel through the lap joint within the top half an inch. This way, the nail you use will be covered by the top cap molding on the wall. If you're feeling a little unsure about installing your new MirroFlex vinyl beadboard paneling yourself, watch ourvideo tutorialto see how it's done! The Cost of Vinyl Beadboard Vinyl beadboard paneling is a much more affordable alternative to real wood beadboard and comes in many colors. Full vinyl beadboard panels cost less than $200, which breaks down to less than $5 per square foot; wood paneling can cost more than twice that amount, and you'll often still need to stain or paint it. In either case, you should also consider the installation cost of beadboard walls. With our vinyl beadboard ceiling and wall panels, it's simple to do the installation yourself, adding to the cost savings. But if you choose wooden paneling, you can expect to pay at least $4 per square foot for a professional to install it. It's easy to see why vinyl beadboard panels are a smart choice for your home: Not only are they an attractive and practical addition to any space, but they're affordable, too. Order yours from Decorative Ceiling Tiles today! |
|
|
 |
Marquis MirroFlex 4x8 Glue Up PVC 3D Wall Panels : USD184.01
Marquis MirroFlex 4x8 Glue Up PVC 3DWall Panels |
|
|
 |
Jubilee - Powder Coated - Tin Ceiling Tile by Shanko - #301 : USD19.99
Jubilee - Powder Coated - Tin Ceiling Tile by Shanko - #301 Sample of Acoustical Option |
|
|
 |
Lilac - Tin Ceiling Tile by Shanko - 24"x24" - #302 : USD10.72
Lilac - Tin Ceiling Tile by Shanko - #302 Sample of Acoustical Option |
|
|
 |
Lilac - Powder Coated - Tin Ceiling Tile by Shanko - #302 : USD19.99
Lilac - Powder Coated - Tin Ceiling Tile by Shanko - #302 Sample of Acoustical Option |
|
|
 |
Holland - Tin Ceiling Tile by Shanko - #305 : USD10.72
Holland - Tin Ceiling Tile by Shanko - #305 Sample of Acoustical Option |
|
|
 |
Puffed Archways - Shanko Powder Coated Tin Cornice 4.3 in. Wide 4 ft. Long - #802 : USD20.15
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Picture Perfect - Shanko Powder Coated Tin Cornice 13.5 in. Wide 4 ft. Long - #706 : USD27.00
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Moonlit Seashore - Shanko - Powder Coated - Tin Cornice 6.4 in. Wide 4 ft. Long - #705 : USD15.25
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Shanko - Powder Coated - Tin Cornice 9 in. Wide 4 ft. Long - #700 : USD24.30
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Shanko - Powder Coated - Tin Cornice - Girder Nosing - #800 : USD18.25
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Shanko Powder Coated Tin Cornice 13.9 in. Wide 4 ft. Long - #901 : USD27.00
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Bijou and Bee Bee Glue-up Styrofoam Ceiling Tile 20 in x 20 in - #R126 : USD4.39
Bijou and Bee Bee Glue-up Styrofoam Ceiling Tile 20 in x 20 in - #R126 Goes Over Popcorn And Most Ceiling Surfaces Styrofoam 20x20 (2.7 sqft) Adds Insulation Easy Install Light Weight No Expensive Tools Needed Paintable With Any Water-Based Paint 3-5 Business Days Delivery Installation Information: Installation Information Project Showcase R126- Plain White Installed in Laundry Room R126- Plain White Installed in Bedroom R126- Plain White Installed in Entrance / Foyer R126- Old Black White Installed in Bathroom R126- Plain White Installed in Religious R126- Plain White Installed in Kitchen R126- Plain White Installed in Living and Dining |
|
|
 |
Rubik 2ft. x 2ft. Seamless Glue-up 3D Wall Panels (48 Sq. Ft. / Pack) : USD273.90
Rubik 2ft. x 2ft. Seamless Glue-up Wall Panel (48 Sq. Ft. / Pack) Seamless wall panels made of high density polystyrene are excellent for creating 3 dimensional accent walls and can be used on ceilings as well. These walls not only add beauty and dimension but have sound dampening qualities. Create your own custom look by adding acrylic paint finish of your choice. Easy glue-up installation is a plus for DIY community. These panels are not suggested for high-traffic areas as they can be dented easier than other materials. Samples are always suggested. |
|
|
 |
Zephyr 2ft. x 2ft. Seamless Glue-up 3D Wall Panels (48 Sq. Ft. / Pack) : USD273.90
Zephyr 2ft. x 2ft. Seamless Glue-up Wall Panel (48 Sq. Ft. / Pack) Seamless wall panels made of high density polystyrene are excellent for creating 3 dimensional accent walls and can be used on ceilings as well. These walls not only add beauty and dimension but have sound dampening qualities. Create your own custom look by adding acrylic paint finish of your choice. Easy glue-up installation is a plus for DIY community. These panels are not suggested for high-traffic areas as they can be dented easier than other materials. Samples are always suggested. Project Showcase ZR-SWP-PW - Plain White Installed in Living and Dining ZR-SWP-PW - Plain White Installed in Living and Dining ZR-SWP-PW - Plain White Installed in Bathroom ZR-SWP-PW - Plain White Installed in Office ZR-SWP-PW - Plain White Installed in Living and Dining ZR-SWP-PW - Plain White Installed in Bedroom |
|
|
 |
3 pack of Grid & Seam Faux Tin Covers : USD9.99
The size of the samples is24" x 1" inches, width will depend on the Grid & Seam itself. You can pick 3 designs. Peel and stick 24" x 1" Will work with 15/16 grid Can be used over seams with glue up ceiling tiles Important:not compatible with DCT01, DCT02, DCT03, DCT04, DCT 05, DCT 06, DCT26, DCT304 models as the colors are not the same. Color Disclaimer The image may not reflect current shade of our tiles. There is a difference in shade from batch to batch and we do not guarantee that the colors will match. We strongly recommend ordering the entire quantity with overages in one order. If you are trying to match an old order, please send images before placing an order. Please order a sample to get current color. Grid & Seam Faux Tin Covers G1 - Antique Brass G1 - Antique Copper G1 - Antique Gold G1 - Antique Silver G1 - Brass G1 - Copper G1 - Cream Pearl G1 - Gold G1 - Silver G1 - White Pearl G2 - Antique Brass G2 - Antique Copper G2 - Antique Gold G2 - Antique Silver G2 - Brass G2 - Copper G2 - Cream Pearl G2 - Gold G2 - Marbella G2 - Royal Grey G2 - Rustic Patina G2 - Silver G2 - White Matte G2 - White Pearl G3 - Antique Brass G3 - Antique Copper G3 - Antique Gold G3 - Antique Silver G3 - Antique White G3 - Brass G3 - Blue Dove G3 - Copper G3 - Cream Pearl G3 - Gold G3 - Silver G3 - White Matte G3 - White Pearl G4 - Antique Brass G4 - Antique Copper G4 - Antique Gold G4 - Antique Silver G4 - Aqua Tin G4 - Brass G4 - Copper G4 - Cream Pearl G4 - Gold G4 - Pink Lady G4 - Silver G4 - White Pearl |
|
|
 |
Shanko Powder Coated Tin Cornice 9.3 in. Wide 4 ft. Long - #900 : USD21.00
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Puffy Arches - Shanko Powder Coated Tin Cornice 2.6 in. Wide 4 ft. Long - #810 : USD18.25
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Double Tulips - Shanko Powder Coated Tin Cornice 10.8 in. Wide 4 ft. Long - #808 : USD24.30
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Fleurs de Lis - Shanko Powder Coated Tin Cornice 13 in. Wide 4 ft. Long - #807 : USD27.00
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Beautiful Butterflies, Wide - Shanko Powder Coated Tin Cornice 4.5 in. Wide 4 ft. Long - #804 : USD18.25
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Egg and Dart Medium Shanko Powder Coated Tin Cornice 3.5 in. Wide 4 ft. Long - #803 : USD20.15
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Cabana Canopy - Shanko Powder Coated Tin Cornice 9 in. Wide 4 ft. Long - #806 : USD21.00
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
FAD Hand Painted Crown Molding - #CMF-028-2 : USD366.85
These Crown Moldings are fully hand painted by a professional artist Finished in metallic colors to match chandeliers, lights fixture, ceiling fans and most of your place accessories Can be used for interior and exterior settings. can also be washed. These Moldings are made of polyurethane that last forever Made in U.S.A. Limited Lifetime Warranty Polyurethane Crown Molding Polyurethane is a hard, dense foam that has many advantages over wood in that it does not rot, crack, splinter, or absorb moisture. here are a few of the many advantages of polyurethane moldings: Exquisite detail and design consistency Lasts longer than mdf or wood crown molding Designed for interior and exterior use Cuts cleanly without splintering Lightweight and easy to install Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Crown Moldings: 15 - 21 days 11 - 30 Crown Moldings: 21 - 30 days 31 - 100 Crown Moldings: 1 - 2 Months 100 + Crown Moldings: Over 2 Months Priority orders, please contact us. |
|
|
 |
Corinthian - Urethane Capital - Pack of 4 - #CAP06X05X02RC : USD67.96
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Bronzed Sun - FAD Hand Painted Ceiling Rings - #CCRF-001-2 : USD688.85
Our ceiling rings are manufactured with a dense architectural polyurethane compound (not Styrofoam) that allows it to be semi-flexible and 100% waterproof. This material is delivered pre-primed for paint. It is installed with architectural adhesive and/or finish nails. It can also be finished with caulk, spackle and your choice of paint, just like wood or MDF. A major advantage of polyurethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot. Ceiling medallions, domes and rings are for decorative use only and should never be used to support any type of fixture or structure. Fans and lights must be supported by the electrical box or other means. Safe to install indoors or outdoors Will not absorb moisture Is lightweight and durable against average wear Recommended tools for installation Nailgun & air compressor (set at 100 PSI or less) Adhesive Spackle Caulk Tape measure |
|
|
 |
Golden Prague II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-016-2 : USD113.85
Golden Prague II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-016-2 For use in a ceiling grid or direct mount Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Golden Acanthus - FAD Hand Painted Ceiling Medallion 30 in - #CCMF-036-4 : USD596.85
Golden Acanthus - FAD Hand Painted Ceiling Medallion 30 in - #CCMF-036-4 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Egg and Dart Medium Shanko Copper Cornice 3.5 in. Wide 4 ft. Long - #803 : USD68.48
Egg and Dart Medium Shanko Copper Cornice 3.5 in. Wide 4 ft. Long - #803 |
|
|
 |
Burnish Leaves - FAD Hand Painted Ceiling Medallion 30 in - #CCMF-036-6 : USD596.85
Burnish Leaves - FAD Hand Painted Ceiling Medallion 30 in - #CCMF-036-6 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Beautiful Butterflies, Wide - Shanko Copper Cornice 4.5 in. Wide 4 ft. Long - #804 : USD68.48
Beautiful Butterflies, Wide - Shanko Copper Cornice 4.5 in. Wide 4 ft. Long - #804 |
|
|
 |
Winter Blossom - FAD Hand Painted Ceiling Medallion 32 in - #CCMF-106-2 : USD596.85
Winter Blossom - FAD Hand Painted Ceiling Medallion 32 in - #CCMF-106-2 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Flutterby - Shanko Copper Ceiling Tile - #335 : USD119.00
Flutterby - Shanko Copper Ceiling Tile - #335 Sample of Acoustical Option |
|
|
 |
Dark Platinum - FAD Hand Painted Ceiling Medallion 33 in - #CCMF-035-A : USD596.85
Dark Platinum - FAD Hand Painted Ceiling Medallion 33 in - #CCMF-035-A Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #304 : USD19.99
Shanko - Tin Plated Steel - Wall and Ceiling Patterns - #304 Sample of Acoustical Option |
|
|
 |
Bronze Acanthus - FAD Hand Painted Ceiling Medallion 30 in - #CCMF-036-5 : USD596.85
Bronze Acanthus - FAD Hand Painted Ceiling Medallion 30 in - #CCMF-036-5 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Jefferson - Urethane Ceiling Medallion 11-3/4 in x 3/8 in - #CM12JE : USD30.87
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Beauty & Balance - FAD Hand Painted Ceiling Medallion 33 in - #CCMF-035-3A : USD596.85
Beauty & Balance - FAD Hand Painted Ceiling Medallion 33 in - #CCMF-035-3A Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Celestial MirroFlex 4x8 Glue Up PVC 3D Wall Panels : USD184.01
Celestial MirroFlex 4x8 Glue Up PVC 3DWall Panels Project Showcase Mirror Silver Installed in Bathroom |
|
|
 |
Nature Evenness - FAD Hand Painted Ceiling Medallion 28 in - #CCMF-121 : USD596.85
Nature Evenness - FAD Hand Painted Ceiling Medallion 28 in - #CCMF-121 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Clover - Shanko - Hand Painted - Tin Ceiling Tile - #203 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Perpetual Harmony II - FAD Hand Painted Ceiling Medallion 29 in - #CCMF-128-2 : USD619.85
Perpetual Harmony II - FAD Hand Painted Ceiling Medallion 29 in - #CCMF-128-2 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option:If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Priority orders, please contact us. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Williamsburg - Shanko - Hand Painted - Tin Ceiling Tile - #505 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Winter Blossom II - FAD Hand Painted Ceiling Medallion 32 in - #CCMF-112-4 : USD573.85
Winter Blossom II - FAD Hand Painted Ceiling Medallion 32 in - #CCMF-112-4 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Shanko - Hand Painted - Wall and Ceiling Patterns - #501 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Shady Impression - FAD Hand Painted Ceiling Medallion 33 in - #CCMF-035-2A : USD596.85
Shady Impression - FAD Hand Painted Ceiling Medallion 33 in - #CCMF-035-2A Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Sheridan Road - Shanko - Hand Painted - Tin Ceiling Tile - #507 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Silver Diamond - FAD Hand Painted Ceiling Medallion 20 in - #CCMF-094-3 : USD516.35
Silver Diamond - FAD Hand Painted Ceiling Medallion 20 in - #CCMF-094-3 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Hamilton Leaf - Urethane Panel Moulding 94-1/2 in x 3-3/4 in x 5/8 in - #CHA03X01HA : USD29.73
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Winter Blossom II - FAD Hand Painted Ceiling Medallion 26 in - #CCMF-112-4A : USD458.85
Winter Blossom II - FAD Hand Painted Ceiling Medallion 26 in - #CCMF-112-4A Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Corbels Glue-up Styrofoam Crown Molding Pack 5 in. Wide 6.5 ft. Long (Pack of 14 / 91 ln. ft.) - #GK 19 : USD233.24
Glue-up Styrofoam Crown Molding Pack 5 in. Wide 6.5 ft. Long (Pack of 14 / 91 ln. ft.) - #GK 19 |
|
|
 |
Large Snowflake IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-003-4 : USD102.35
Large Snowflake IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-003-4 For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Kent Urethane Plinths and Bases Nail up - 3-3/4 in x 3-3/4 in x 1-3/8 in : USD9.93
Will not crack, warp, or split Impervious to insects Outlasts Plastics, Steel, Rubber and Aluminum Abrasion Resistance (Non-Marking) Lightweight and easy to install Low Tooling cost |
|
|
 |
County Cork - Shanko - Hand Painted - Tin Ceiling Tile - #509 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Odysseus Shield - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-014 : USD102.35
Odysseus Shield - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-014 For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Marcos Glue-up Styrofoam Crown Molding 4.5 in. Wide 6.5 ft. Long (Pack of 30 / 195 ln. ft.) - #KL-80 : USD304.50
Marcos Glue-up Styrofoam Crown Molding 4.5 in. Wide 6.5 ft. Long (Pack of 30 / 195 ln. ft.) - #KL-80 |
|
|
 |
Star - MirroFlex - 24"x24" - Ceiling Tiles Pack : USD86.78
Star - MirroFlex - Ceiling Tiles Pack |
|
|
 |
Interlink - MirroFlex - Light Diffusion Pack : USD120.42
Interlink - MirroFlex - Light Diffusion Pack |
|
|
 |
Rustic Lattice II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-017-2 : USD102.35
Rustic Lattice II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-017-2 For Use in a Ceiling Grid or Direct Mount Hand Painted Ceiling Tiles This ceiling tile is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture, ceiling fans, crown moldings, decorative accessories, etc. Can be used for interior and exterior settings. Can also be washed. This tile is made of PVC that last forever. Made in U.S.A. Fire rated. Limited lifetime warranty. Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Glue-up Styrofoam Ceiling Medallion 28" - #K-Dalia : USD37.42
K-Dalia - 28" Ceiling Medallion |
|
|
 |
Irma 13" Glue-up Styrofoam Ceiling Medallion : USD8.98
K-26 - 13" Ceiling Medallion |
|
|
 |
Rustic Lattice - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-017 : USD102.35
Rustic Lattice - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-017 For Use in a Ceiling Grid or Direct Mount Hand Painted Ceiling Tiles This ceiling tile is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture, ceiling fans, crown moldings, decorative accessories, etc. Can be used for interior and exterior settings. Can also be washed. This tile is made of PVC that last forever. Made in U.S.A. Fire rated. Limited lifetime warranty. Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
FAD Faux Marble Finish Column Base - #CPBF-AT-ACBSOG : USD228.85
FAD Faux Marble Finish Column Base - #CPBF-AT-ACBSOG |
|
|
 |
Shanko - Hand Painted - Wall and Ceiling Patterns - #535 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Large Snowflake V - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-003-5 : USD102.35
Large Snowflake V - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-003-5 For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Antoinette - Shanko Copper Ceiling Tile - #321 : USD119.00
Antoinette - Shanko Copper Ceiling Tile - #321 Sample of Acoustical Option |
|
|
 |
Shanko - Copper Ceiling Tile - #234 : USD119.00
Shanko - Copper Ceiling Tile - #234 Sample of Acoustical Option |
|
|
 |
Shanko - Copper Ceiling Tile - #204 : USD119.00
Shanko - Copper Ceiling Tile - #204 Sample of Acoustical Option |
|
|
 |
Large Snowflake VI - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-003-6 : USD102.35
Large Snowflake VI - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-003-6 For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #208 : USD19.99
Shanko - Tin Plated Steel - Wall and Ceiling Patterns - #208 Sample of Acoustical Option |
|
|
 |
Shanko - Powder Coated - Tin - Wall and Ceiling Patterns - #518 : USD19.99
Shanko - Tin Plated Steel - Wall and Ceiling Patterns - #518 Sample of Acoustical Option |
|
|
 |
Noce Seccia - Door Skin for a Flat Panel Door Makeover - MirroFlex : USD145.70
Noce Seccia -Door Skin for a Flat Panel Door Makeover - MirroFlex MirroFlex Door Skins are designed to apply over existing flat panel doors for a new, fresh look at a reasonable cost. Skip the time-consuming installation of new doors and the price! With this environmentally friendly solution, you no longer have to send old doors to the landfill. Why Choose Door Skins? Stock Collection Adhesive Backing Easy Adhesion and Fabrication High Impact Finish Chemical Resistant Can Be Fire Rated (If Installed with Fire Rated Adhesive on a Fire Rated Door). Skins WITHOUT adhesive, have Class A fire rating when used with 3M Fastbond 30-NF adhesive, applied on-site Cut to Fit Most Common Door Sizes (Custom cut only to length and not to width) Having option of Adhesive Backing and Non-adhesive Backing Custom Fusion Printing Also Available |
|
|
 |
Driftwood - Door Skin - MirroFlex : USD145.70
Driftwood - Door Skin - MirroFlex MirroFlex Door Skins are designed to apply over existing flat panel doors for a new, fresh look at a reasonable cost. Skip the time-consuming installation of new doors and the price! With this environmentally friendly solution, you no longer have to send old doors to the landfill. Why Choose Door Skins? Stock Collection Adhesive Backing Easy Adhesion and Fabrication High Impact Finish Chemical Resistant Can Be Fire Rated (If Installed with Fire Rated Adhesive on a Fire Rated Door). Skins WITHOUT adhesive, have Class A fire rating when used with 3M Fastbond 30-NF adhesive, applied on-site Cut to Fit Most Common Door Sizes (Custom cut only to length and not to width) Having option of Adhesive Backing and Non-adhesive Backing Custom Fusion Printing Also Available |
|
|
 |
Portuna - Door Skin - MirroFlex : USD145.70
Portuna - Door Skin - MirroFlex MirroFlex Door Skins are designed to apply over existing flat panel doors for a new, fresh look at a reasonable cost. Skip the time-consuming installation of new doors and the price! With this environmentally friendly solution, you no longer have to send old doors to the landfill. Why Choose Door Skins? Stock Collection Adhesive Backing Easy Adhesion and Fabrication High Impact Finish Chemical Resistant Can Be Fire Rated (If Installed with Fire Rated Adhesive on a Fire Rated Door). Skins WITHOUT adhesive, have Class A fire rating when used with 3M Fastbond 30-NF adhesive, applied on-site Cut to Fit Most Common Door Sizes (Custom cut only to length and not to width) Having option of Adhesive Backing and Non-adhesive Backing Custom Fusion Printing Also Available |
|
|
 |
Whirligigs III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-002-3 : USD102.35
Whirligigs III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-002-3 For Use in a Ceiling Grid or Direct Mount Hand Painted Ceiling Tiles This ceiling tile is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture, ceiling fans, crown moldings, decorative accessories, etc.. Can be used for interior and exterior settings. Can also be washed. This tile is made of PVC that last forever. Made in U.S.A. Fire rated. Limited lifetime warranty. Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Julio Glue-up Styrofoam Crown Molding 2 in. Wide 6.5 ft. Long (Pack of 125 / 812.5 ln. ft.) - #KL-60 : USD538.75
Julio Glue-up Styrofoam Crown Molding 2 in. Wide 6.5 ft. Long (Pack of 125 / 812.5 ln. ft.) - #KL-60 |
|
|
 |
Miguel Glue-up Styrofoam Crown Molding 3 in. Wide 6.5 ft. Long (Pack of 62 / 403 ln. ft.) - #KL-50 : USD282.10
Miguel Glue-up Styrofoam Crown Molding 3 in. Wide 6.5 ft. Long (Pack of 62 / 403 ln. ft.) - #KL-50 |
|
|
 |
My Beautiful Damaris II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-015-2 : USD102.35
Elizabethan Shield II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-015-2 For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Glue-up Styrofoam Corners Pack of 2 - #N-6 : USD12.82
N-6 - Corners Pack of 2 |
|
|
 |
Gloss White - Door Skin for Flat Panel Door Makeover - MirroFlex : USD72.61
Gloss White - Door Skin - MirroFlex MirroFlex Door Skins are designed to apply over existing flat panel doors for a new, fresh look at a reasonable cost. Skip the time-consuming installation of new doors and the price! With this environmentally friendly solution, you no longer have to send old doors to the landfill. Why Choose Door Skins? Stock Collection Adhesive Backing Easy Adhesion and Fabrication High Impact Finish Chemical Resistant Can Be Fire Rated (If Installed with Fire Rated Adhesive on a Fire Rated Door). Skins WITHOUT adhesive, have Class A fire rating when used with 3M Fastbond 30-NF adhesive, applied on-site Cut to Fit Most Common Door Sizes (Custom cut only to length and not to width) Having option of Adhesive Backing and Non-adhesive Backing Custom Fusion Printing Also Available |
|
|
 |
My Beautiful Damaris III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-015-3 : USD102.35
Elizabethan Shield III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-015-3 For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Raleigh - Shanko Copper Ceiling Tile - #523 : USD119.00
Raleigh - Shanko Copper Ceiling Tile - #523 Sample of Acoustical Option |
|
|
 |
Tiptoe - Shanko Copper Ceiling Tile - #309 : USD119.00
Tiptoe - Shanko Copper Ceiling Tile - #309 Sample of Acoustical Option Project Showcase SKC309 - Solid Copper Installed in Living and Dining |
|
|
 |
My Beautiful Damaris IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-015-4 : USD102.35
Elizabethan Shield IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-015-4 For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Rossini - Shanko Copper Ceiling Tile - #508 : USD124.95
Rossini - Shanko Copper Ceiling Tile - #508 Sample of Acoustical Option |
|
|
 |
County Cork - Shanko Copper Ceiling Tile - #509 : USD119.00
County Cork - Shanko Solid Copper Ceiling Tile - #509 Sample of Acoustical Option |
|
|
 |
Shanko - Copper Ceiling Tile - #211 : USD119.00
Shanko - Copper Ceiling Tile - #211 Sample of Acoustical Option |
|
|
 |
Golden Prague VI - FAD Faux Patina Finish Hand Painted Ceiling Tile 24 in X 24 in - #CTF-016-6 : USD159.85
Golden Prague VI - FAD Faux Patina Finish Hand Painted Ceiling Tile 24 in X 24 in - #CTF-016-6 For use in a ceiling grid or direct mount Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Deco Crowns - Shanko Powder Coated Tin Cornice 6.9 in. Wide 4 ft. Long - #905 : USD19.00
Cone Head Nails are available in all Finishes.STEEL cornice come UNFINISHED, and need to be treated with an OIL BASED paint. For best results use a semi-gloss or high-gloss paint to prevent rusting or tarnishing. To leave STEEL panels in natural state, use clear glossy enamel by Rustoleum. |
|
|
 |
Shanko - Copper Ceiling Tile - #518 : USD119.00
Shanko - Copper Ceiling Tile - #518 Sample of Acoustical Option |
|
|
 |
Shanko - Copper Ceiling Tile - #208 : USD119.00
Shanko - Copper Ceiling Tile - #208 Sample of Acoustical Option |
|
|
 |
Casablanca - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020 : USD102.35
Casablanca - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020 For use in a ceiling grid or direct mount Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Casablanca II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020-2 : USD102.35
Casablanca II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020-2 For use in a ceiling grid or direct mount Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Casablanca III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020-3 : USD102.35
Casablanca III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020-3 For use in a ceiling grid or direct mount Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Quilted - MirroFlex - 24"x24" - Ceiling Tiles Pack : USD173.57
Quilted - MirroFlex - 24"x24"- Ceiling Tiles Pack |
|
|
 |
Mojave Vertical MirroFlex 4x8 / 4x10 Glue Up PVC 3D Wall Panels : USD184.01
Mojave Vertical MirroFlex 4x8 / 4x10 Glue Up PVC 3DWall Panels Project Showcase 124-5001-MOJAVER - Gloss White Paintable Installed in Front-Desk |
|
|
 |
Shanko - Stainless Steel - Backsplash Tile - #210ss : USD69.00
Shanko - Stainless Steel - Backsplash Tile |
|
|
 |
Da Vinci IV-A - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-012-4A : USD102.35
Da Vinci IV-A - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-012-4A For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Shanko - Aluminum - Backsplash Tile- #211 : USD36.00
Shanko - Aluminum - Backsplash Tile - #211 |
|
|
 |
Shanko - Aluminum - Backsplash Tile - #204 : USD36.00
Shanko - Aluminum - Backsplash Tile - #204 |
|
|
 |
Shanko - Aluminum - Backsplash Tile - #574 : USD36.00
Shanko - Aluminum - Backsplash Tile - #574 |
|
|
 |
Da Vinci IV-B - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-012-4B : USD102.35
Da Vinci IV-B - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-012-4B For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. Project Showcase CTF-012-4B - Copper, Sapphire, Tequila Gold Installed inKitchen |
|
|
 |
Shanko - Tin Plated Steel - Backsplash Tile - #211 : USD10.72
Shanko - Tin Plated Steel - Backsplash Tile - #211 |
|
|
 |
Right On - Shanko Tin Plated Steel Backsplash Tile - #215 : USD10.72
Right On - Shanko Tin Plated Steel Backsplash Tile - #215 |
|
|
 |
Gothic Reims III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-009-3 : USD102.35
Gothic Reims III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-009-3 For use in a ceiling grid or direct mount Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Touch Up Paint 1.OZ - A La Maison Ceilings - DIY Crown Moldings : USD10.00
Touch Up Paint 1.OZ - A La Maison Ceilings - DIY Crown Moldings 1oz. of water based paint to touch up your project. |
|
|
 |
Glue-up Styrofoam Corners Pack of 2 - #N-4 : USD14.94
N-4 - Corners Pack of 2 |
|
|
 |
Glue-up Styrofoam Corners Pack of 2 - #N-5 : USD10.98
N-5 - Corners Pack of 2 |
|
|
 |
Julio Glue-up Styrofoam Crown Molding 2 in. Wide 6.5 ft. Long - #KL-60 : USD7.69
Julio Glue-up Styrofoam Crown Molding 2 1/4 in. Wide 6.5 ft. Long - #KL-60. Crown molding is a molding that goes on the seam where wall meets the ceiling, this is why some people refer to it as wall molding. |
|
|
 |
Miguel Glue-up Styrofoam Crown Molding 3 in. Wide 6.5 ft. Long- #KL-50 : USD9.99
Miguel Glue-up Styrofoam Crown Molding2 25/32 in. Wide 6.5 ft. Long- #KL-50.Crown molding is a molding that goes on the seam where wall meets the ceiling, this is why some people refer to it aswall molding. Project Showcase KL-50 - Plain White Installed in Living and Dining KL-50 - Plain White Installed in Living and Dining KL-50 - Plain White Installed in Bathroom |
|
|
 |
Marcos Glue-up Styrofoam Crown Molding 4.5 in. Wide 6.5 ft. Long- #KL-80 : USD14.16
Marcos Glue-up Styrofoam Crown Molding4 3/8 in. Wide 6.5 ft. Long- #KL-80.Crown molding is a molding that goes on the seam where wall meets the ceiling, this is why some people refer to it aswall molding. Project Showcase KL-80 - Ultra Pure White - Satin (Behr) Installed in Living and Dining KL-80 - Plain White (Unpainted) Installed in Living and Dining KL-80 - Plain White Installed in Bedroom KL-80 - Dove White Installed in Living and Dining |
|
|
 |
Dentil Glue-up Styrofoam Crown Molding 5 in. Wide 6.5 ft. Long (Pack of 21 / 136.5 ln. ft.) - #GK 17 : USD240.45
Dentil Glue-up Styrofoam Crown Molding 5 in. Wide 6.5 ft. Long (Pack of 21 / 136.5 ln. ft.) - #GK 17 Project Showcase R02- Plain White Installed in Bathroom |
|
|
 |
Dentil Crown Molding, 5 Inches by 6.5 Feet - #GK17 : USD16.99
Elevate Your Decor With Dentil Crown Molding Crown molding with dentil detailing can add a timeless and traditional look to a home or commercial space. This type of molding has small, square blocks that form a geometric pattern and look a little bit like a row of teeth; this is why these blocks are called dentils. Our dentil crown molding is made from lightweight, long-lasting Styrofoam and comes in a range of colors to suit different rooms and styles of décor. It is often used in classical-style homes, but with the right colors and styling, it can add a unique twist to a more modern space as well. One of the benefits of crown molding with dentil detailing is that it can add depth and dimension to a room. Drawing the eye upward toward the ceiling withcrown moldingcan make a space feel taller and more spacious as well. It can also create a more cohesive look by tying together different elements of a room's design. When installing dentil crown molding, it is essential to ensure that it is properly aligned and securely attached to the wall or ceiling. It's pretty easy to install yourself, though: We've even provideddetailed instructionson how to do it. Our dentil crown molding is a timeless and versatile design element that can add beauty and sophistication to any space. Order yours online today to give your home or business an elegant look at an affordable price! Project Showcase R02- Plain White Installed in Bathroom GK17 - Plain White Installed in Living and Dining GK17 - Plain White Installed in Living and Dining GK17 - Plain White Installed in Living and Dining GK17 - Plain White Installed in Living and Dining |
|
|
 |
Corbels Glue-up Styrofoam Crown Molding 5 in. Wide 6.5 ft. Long - #GK 19 : USD22.99
Corbels Glue-up Styrofoam Crown Molding5 7/16 in. Wide 6.5 ft. Long - #GK 19 Project Showcase GK19 - Plain White Installed in Living and Dining GK19 - Plain White Installed in Living and Dining GK19 - Plain White Installed in Living and Dining GK19 - Plain White Installed in Living and Dining GK19 - Plain White Installed in Entrance / Foyer GK19 - Plain White Uncategorized |
|
|
 |
Curves - MirroFlex - 24"x24" - Ceiling Tiles Pack : USD86.78
Curves - MirroFlex - 24"x24" - Ceiling Tiles Pack |
|
|
 |
Roman Corinthian - FAD Faux Marble Finish Column Capital - #CPCF-RC-AB : USD447.35
This column capital is fully hand painted by a professional artist. Finished in metallic colors to match most of the decorative elements in any house or business Can be used for interior and exterior settings. Can also be washed. This capital is made of Endura-Stone that last forever. Made in U.S.A. Lifetime Warranty Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Capitals: 2 weeks. 10 - 20 Capitals: 3 weeks. 20 + Capitals: 4 weeks. |
|
|
 |
Roman Corinthian - FAD Faux Marble Finish Column Capital - #CPCF-RC-OG : USD447.35
This column capital is fully hand painted by a professional artist. Finished in metallic colors to match most of the decorative elements in any house or business Can be used for interior and exterior settings. Can also be washed. This capital is made of Endura-Stone that last forever. Made in U.S.A. Lifetime Warranty Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Capitals: 2 weeks. 10 - 20 Capitals: 3 weeks. 20 + Capitals: 4 weeks. |
|
|
 |
Roman Corinthian - FAD Faux Marble Finish Column Capital - #CPCF-RC-IS : USD447.35
This column capital is fully hand painted by a professional artist. Finished in metallic colors to match most of the decorative elements in any house or business Can be used for interior and exterior settings. Can also be washed. This capital is made of Endura-Stone that last forever. Made in U.S.A. Lifetime Warranty Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Capitals: 2 weeks. 10 - 20 Capitals: 3 weeks. 20 + Capitals: 4 weeks. |
|
|
 |
Effulgent Sun - FAD Hand Painted Ceiling Rings - #CCRF-001 : USD688.85
Our ceiling rings are manufactured with a dense architectural polyurethane compound (not Styrofoam) that allows it to be semi-flexible and 100% waterproof. This material is delivered pre-primed for paint. It is installed with architectural adhesive and/or finish nails. It can also be finished with caulk, spackle and your choice of paint, just like wood or MDF. A major advantage of polyurethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot. Ceiling medallions, domes and rings are for decorative use only and should never be used to support any type of fixture or structure. Fans and lights must be supported by the electrical box or other means. Safe to install indoors or outdoors Will not absorb moisture Is lightweight and durable against average wear Recommended tools for installation Nailgun & air compressor (set at 100 PSI or less) Adhesive Spackle Caulk Tape measure |
|
|
 |
Damon - FAD Hand Painted Corbel - #CF-001 : USD102.35
These corbels are for decorative use only. These should not be used for any structural support Our corbels are manufactured with a dense architectural polyurethane compound (not Styrofoam) that allows it to bevery durable and 100% waterproof. These products can be installed with architectural adhesive and/or finish nails. A major advantage of polyurethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot. Safe to install indoors or outdoors Will not absorb moisture Is lightweight and durable against average wear |
|
|
 |
Right On - Shanko - Hand Painted - Tin Ceiling Tile - #215 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Colton Leaf - FAD Hand Painted Corbel - #CF-003 : USD90.85
These corbels are for decorative use only. These should not be used for any structural support Our corbels are manufactured with a dense architectural urethane compound (not Styrofoam) that allows it to bevery durable and 100% waterproof. These products can be installed with architectural adhesive and/or finish nails. A major advantage of urethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot. Safe to install indoors or outdoors Will not absorb moisture Is lightweight and durable against average wear |
|
|
 |
Alexandria - FAD Hand Painted Corbel - #CF-011 : USD25.29
These corbels are for decorative use only. These should not be used for any structural support Our corbels are manufactured with a dense architectural urethane compound (not Styrofoam) that allows it to bevery durable and 100% waterproof. These products can be installed with architectural adhesive and/or finish nails. A major advantage of urethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot. Safe to install indoors or outdoors Will not absorb moisture Is lightweight and durable against average wear |
|
|
 |
Alexandria - FAD Hand Painted Corbel - #CF-011-2 : USD25.29
These corbels are for decorative use only. These should not be used for any structural support Our corbels are manufactured with a dense architectural urethane compound (not Styrofoam) that allows it to bevery durable and 100% waterproof. These products can be installed with architectural adhesive and/or finish nails. A major advantage of urethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot. Safe to install indoors or outdoors Will not absorb moisture Is lightweight and durable against average wear |
|
|
 |
Scroll Leaf - FAD Hand Painted Corbel - #CF-015 : USD37.94
These corbels are for decorative use only. These should not be used for any structural support Our corbels are manufactured with a dense architectural urethane compound (not Styrofoam) that allows it to bevery durable and 100% waterproof. These products can be installed with architectural adhesive and/or finish nails. A major advantage of urethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot. Safe to install indoors or outdoors Will not absorb moisture Is lightweight and durable against average wear |
|
|
 |
Scroll Leaf - FAD Hand Painted Corbel - #CF-015-2 : USD37.94
These corbels are for decorative use only. These should not be used for any structural support Our corbels are manufactured with a dense architectural urethane compound (not Styrofoam) that allows it to bevery durable and 100% waterproof. These products can be installed with architectural adhesive and/or finish nails. A major advantage of urethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot. Safe to install indoors or outdoors Will not absorb moisture Is lightweight and durable against average wear |
|
|
 |
Scroll Leaf - FAD Hand Painted Corbel - #CF-015-3 : USD37.94
These corbels are for decorative use only. These should not be used for any structural support Our corbels are manufactured with a dense architectural urethane compound (not Styrofoam) that allows it to bevery durable and 100% waterproof. These products can be installed with architectural adhesive and/or finish nails. A major advantage of urethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot. Safe to install indoors or outdoors Will not absorb moisture Is lightweight and durable against average wear |
|
|
 |
Night Flashes - FAD Hand Painted Ceiling Medallion 28 in - #CCMF-035-4 : USD550.85
Night Flashes - FAD Hand Painted Ceiling Medallion 28 in - #CCMF-035-4 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Shanko - Hand Painted - Wall and Ceiling Patterns - #209 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Northern Shrubberies - FAD Hand Painted Ceiling Medallion 23 in - #CCMF-099-3 : USD424.35
Northern Shrubberies - FAD Hand Painted Ceiling Medallion 23 in - #CCMF-099-3 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Shanko - Hand Painted - Wall and Ceiling Patterns - #204 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. |
|
|
 |
Silver Ocean - FAD Hand Painted Contemporary Ceiling Medallion 27 in - #CCMF-151-3 : USD458.85
Silver Ocean - FAD Hand Painted Contemporary Ceiling Medallion 27 in - #CCMF-151-3 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Flutterby - Shanko - Hand Painted - Tin Ceiling Tile - #335 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Valencia - FAD Hand Painted Ceiling Tile 24 in X 48 in- #CTF-026 : USD205.85
Valencia - FAD Hand Painted Ceiling Tile 24 in X 48 in - #CTF-026 Hand Painted Ceiling Tiles This ceiling tile is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture, ceiling fans, crown moldings, decorative accessories, etc. Can be used for interior and exterior settings. Can also be washed. This tile is made of PVC that last forever. Made in U.S.A. Fire rated. Limited lifetime warranty. Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028″ PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won’t have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16″ - 1″ T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2×4 grid ceiling, but would prefer the look of the 2×2 ceiling tiles, simply insert a 2′ center T bar available online or at most local hardware stores…it’s easy! Shipping lead time per quantities: Please be advised that this is a hand painted job and there’s a lot of time consuming doing it, and, of course, human factor involved. Thank you for understanding. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. |
|
|
 |
Ceiling Tile Grid & Seam Cover - 24 in - #CTGSCF-001 : USD320.85
Ceiling Tile Grid & Seam Cover 24 in X 1 in - #CTGSCF-001 Hand Painted Ceiling Tiles This ceiling tile is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture, ceiling fans, crown moldings, decorative accessories, etc.. Can be used for interior and exterior settings. Can also be washed. This tile is made of PVC that last forever. Made in U.S.A. Fire rated. Limited lifetime warranty. Peel and stick 24″ x 1″ Will work with 15/16 grid Can be used over seams with glue up ceiling tiles. Shipping lead time per quantities: Please be advised that this is a hand painted job and there’s a lot of time consuming doing it, and, of course, human factor involved. Thank you for understanding. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. |
|
|
 |
Wrought Iron VI - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-008-6 : USD102.35
Wrought Iron VI - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-008-6 Hand Painted Ceiling Tiles This ceiling tile is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture, ceiling fans, crown moldings, decorative accessories, etc.. Can be used for interior and exterior settings. Can also be washed. This tile is made of PVC that last forever. Made in U.S.A. Fire rated. Limited lifetime warranty. Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028″ PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won’t have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16″ - 1″ T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2×4 grid ceiling, but would prefer the look of the 2×2 ceiling tiles, simply insert a 2′ center T bar available online or at most local hardware stores…it’s easy! Shipping lead time per quantities: Please be advised that this is a hand painted job and there’s a lot of time consuming doing it, and, of course, human factor involved. Thank you for understanding. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over |
|
|
 |
Shanko - Hand Painted - Wall and Ceiling Patterns - #309 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Cubism - Shanko - Hand Painted - Tin Ceiling Tile - #320 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Casablanca IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020-4 : USD102.35
Casablanca IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020-4 Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028″ PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won’t have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16″ - 1″ T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2×4 grid ceiling, but would prefer the look of the 2×2 ceiling tiles, simply insert a 2′ center T bar available online or at most local hardware stores…it’s easy! Shipping lead time per quantities: Please be advised that this is a hand painted job and there’s a lot of time consuming doing it, and, of course, human factor involved. Thank you for understanding. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over |
|
|
 |
Celestial - MirroFlex - 24"x24" - Ceiling Tiles Pack : USD86.78
Celestial - MirroFlex - 24"x24" - Ceiling Tiles Pack Project Showcase Mirror Silver Installed in Bathroom |
|
|
 |
Romeo, Romeo - Shanko - Hand Painted - Tin Ceiling Tile - #502 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Casablanca V - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020-5 : USD102.35
Casablanca V - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-020-5 Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028″ PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won’t have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16″ - 1″ T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2×4 grid ceiling, but would prefer the look of the 2×2 ceiling tiles, simply insert a 2′ center T bar available online or at most local hardware stores…it’s easy! Shipping lead time per quantities: Please be advised that this is a hand painted job and there’s a lot of time consuming doing it, and, of course, human factor involved. Thank you for understanding. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over |
|
|
 |
Gael - Shanko - Hand Painted - Tin Ceiling Tile - #540 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Poppy - Shanko - Hand Painted - Tin Ceiling Tile - #306 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Downtown II - FAD Faux Patina Finish Hand Painted Ceiling Tile 24 in X 24 in - #CTF-022-2 : USD159.85
Downtown II - FAD Faux Patina Finish Hand Painted Ceiling Tile 24 in X 24 in - #CTF-022-2 For Use in a Ceiling Grid or Direct Mount Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center T bar available online or at most local hardware stores...it's easy! IF EXTERIOR SETTING IS CHOSEN A SEALER COAT SHOULD BE APPLIED FOR PROTECTION AND DURABILITY, $5.00 PER ITEM WILL BE ADDED TO THE PRICE. Delivery lead time per quantity: Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over Priority orders, please contact us. |
|
|
 |
Lilac - Shanko - Hand Painted - Tin Ceiling Tile - #302 : USD40.78
All Patterns can be perforated for acoustical purposes Cone Head Nails are available in all Finishes. Sample of Acoustical Option |
|
|
 |
Stain Touch Up Kit 7 Oz for Faux Wood Beams : USD16.50
Stain Touch Up Kit 7 Oz Our Stain Touch Up Kits include 7 Oz. of stain, 1 brush, 1 cloth and application instructions. Use for touch up of color on all of our pre-finished Faux Wood Ceiling Beam, Truss & Plank products. |
|
|
 |
Golden Prague IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-016-4 : USD113.85
Golden Prague IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-016-4 Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028″ PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won’t have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16″ - 1″ T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2×4 grid ceiling, but would prefer the look of the 2×2 ceiling tiles, simply insert a 2′ center T bar available online or at most local hardware stores…it’s easy! Shipping lead time per quantities: Please be advised that this is a hand painted job and there’s a lot of time consuming doing it, and, of course, human factor involved. Thank you for understanding. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over |
|
|
 |
Faux Iron Bolt Head : USD3.08
Urethane bolt heads accent straps, hangers and plates which are used on any faux or natural wood beam. Corresponding nut heads are sold separately. Lead time is 5-7 business days. |
|
|
 |
Faux Iron Nut Heads : USD3.08
Urethane nut heads accent straps, hangers and plates with the look of forged iron. Corresponding bolt heads are sold separately. Lead time is 5-7 business days. |
|
|
 |
Faux Iron Clavos : USD3.08
Urethane clavos accent straps, hangers and plates. Lead time is 5-7 business days. |
|
|
 |
Golden Prague V - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-016-5 : USD113.85
Golden Prague V - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-016-5 Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028″ PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won’t have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16″ - 1″ T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2×4 grid ceiling, but would prefer the look of the 2×2 ceiling tiles, simply insert a 2′ center T bar available online or at most local hardware stores…it’s easy! Shipping lead time per quantities: Please be advised that this is a hand painted job and there’s a lot of time consuming doing it, and, of course, human factor involved. Thank you for understanding. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over |
|
|
 |
Tritan BP - 48 in x 3 in x 3 in Faux Universal Outside Stone Corner - Gray Fox : USD60.31
The universal faux stone outside corner can be used with any of our panel products. The corner is designed to be butted up against the panel. |
|
|
 |
Tritan BP - 48 in x 3 in x 3 in Faux Universal Outside Stone Corner - Pecan : USD60.31
The universal faux stone outside corner can be used with any of our panel products. The corner is designed to be butted up against the panel. |
|
|
 |
Lover’s Knot IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-005-4 : USD102.35
Lover’s Knot IV - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-005-4 Fine Art Deco Collection Tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028″ PVC vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won’t have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16″ - 1″ T-Bar Ceiling Systems and many come in a variety of colors. If you have a 2×4 grid ceiling, but would prefer the look of the 2×2 ceiling tiles, simply insert a 2′ center T bar available online or at most local hardware stores…it’s easy! Shipping lead time per quantities: Please be advised that this is a hand painted job and there’s a lot of time consuming doing it, and, of course, human factor involved. Thank you for understanding. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over |
|
|
 |
Glue-up Styrofoam Corners - #N-6 : USD6.41
N-6 - Corners |
|
|
 |
Glue-up Styrofoam Corners - #N-4 : USD7.47
N-4 - Corners |
|
|
 |
Glue-up Styrofoam Corners - #N-5 : USD5.49
N-5 - Corners |
|
|
 |
Black Hole - FAD Hand Painted Contemporary Ceiling Medallion 27 in - #CCMF-151 : USD458.85
Black Hole - FAD Hand Painted Contemporary Ceiling Medallion 27 in - #CCMF-151 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Cole Urethane Plinths and Bases Nail up- 4-3/8 in x 4-3/8 in x 1 in : USD23.06
Will not crack, warp, or split Impervious to insects Outlasts Plastics, Steel, Rubber and Aluminum Abrasion Resistance (Non-Marking) Lightweight and easy to install Low Tooling cost |
|
|
 |
Galactica - FAD Hand Painted Contemporary Ceiling Medallion 27 in - #CCMF-151-2 : USD458.85
Galactica - FAD Hand Painted Contemporary Ceiling Medallion 27 in - #CCMF-151-2 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Two pieces option: If your light fixture, chandelier or ceiling fan is already installed and you don’t want to remove it, you have the option of buying this ceiling medallion in two pieces. Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Harrington Urn - Urethane Panel Moulding 94-1/2 in x 7-1/2 in x 1-3/4 in - #CHA07X01HA : USD101.91
Can be cut, drilled, screwed, or nailed Similar density to that of pine Beautiful details and design Factory primed and ready for paint Can be painted or faux finished Lightweight for easy installation |
|
|
 |
Wavy Ocean - FAD Hand Painted Contemporary Ceiling Medallion - #CCMF-150 : USD458.85
Wavy Ocean - FAD Hand Painted Contemporary Ceiling Medallion - #CCMF-150 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Priority orders, please contact us. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Standard - Urethane Panel Moulding 94-1/2 in x 5 in x 4 in - #MLD05X04ST : USD86.56
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Colored Ocean - FAD Hand Painted Contemporary Ceiling Medallion 27 in - #CCMF-150-2 : USD458.85
Colored Ocean - FAD Hand Painted Contemporary Ceiling Medallion 27 in - #CCMF-150-2 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Odessa - Urethane Panel Moulding 94-1/2 in x 6-1/4 in x 1-1/2 in - #CHA06X01OD : USD58.75
Can be cut, drilled, screwed, or nailed Similar density to that of pine Beautiful details and design Factory primed and ready for paint Can be painted or faux finished Lightweight for easy installation |
|
|
 |
Sunset Ocean - FAD Hand Painted Contemporary Ceiling Medallion - #CCMF-150-3 : USD458.85
Sunset Ocean - FAD Hand Painted Contemporary Ceiling Medallion - #CCMF-150-3 Ceiling Medallion is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture and ceiling fans. Can be used for interior and exterior settings. Can also be washed. Medallion is made of polyurethane that last forever. Center Hole option available and it’s Free! Made in U.S.A. Lifetime warranty Shipping Lead Time As this is a custom hand painted product, please allow 7 to 10 business days for shipping. Delivery Lead Time Per Quantities: Please be advised that this is a hand painted job and is very time consuming, see time per quantities below. 1 - 10 Medallions: 7 - 10 days. 10 - 50Medallions: 15 - 21 days. 100 +Medallions: 1 - 2 Months. Priority orders, please contact us. Exterior Settings If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price. Finish Sheen You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service. Center Hole Drilling Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallionon product options,we will cut it for you. How to fit the Canopy in your new Medallion In most of the ceiling medallions, the design close to the center area allow to place a canopy wider than the inside diameter that come from factory, that's the maximum diameter that a canopy can fit, a small design area around the hole might be covered but you save the canopy (recommended), other option is to replace your canopy for a smaller one that fits the inside diameter. Manufacturer Explanation About The Product Modeled after original historical patterns and designs. Solid urethane for maximum durability and detail. Lightweight for quick and easy installation. Can be cut, drilled, glued, or screwed. Can be used on the interior or exterior settings. |
|
|
 |
Grandma’s Doilies Quartet - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-018 : USD102.35
Grandma’s Doilies Quartet - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-018 For use in a ceiling grid or direct mount Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Tritan BP - 48 in x 3 in x 3 in Faux Universal Outside Stone Corner - Cappuccino : USD60.31
The universal faux stone outside corner can be used with any of our panel products. The corner is designed to be butted up against the panel. |
|
|
 |
Tritan BP - 48 in x 3 in x 3 in Faux Universal Outside Stone Corner - Oyster Gray : USD60.31
The universal faux stone outside corner can be used with any of our panel products. The corner is designed to be butted up against the panel. |
|
|
 |
Grandma’s Doilies Quartet II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-018-2 : USD102.35
Grandma’s Doilies Quartet II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-018-2 For use in a ceiling grid or direct mount Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Alexa - Urethane Panel Moulding 94-1/2 in x 7-7/8 in x 1-3/8 in - #MLD07X01AX : USD67.96
Modeled after original historical patterns and designs Solid urethane for maximum durability and detail Lightweight for quick and easy installation Factory primed and ready for paint or faux finish Can be cut, drilled, glued, or screwed Can be used on the interior or exterior |
|
|
 |
Flower - Urethane Stair Bracket Right - #SB08X06FL-R : USD18.39
With the beauty of original and historical styles, decorative stair brackets add the finishing touch to stair systems. Manufactured from a high density urethane foam, they hold the same type of density and detail as traditional plaster stair bracket products. They come factory primed and can be easily installed using standard finishing nails and/or polyurethane construction adhesive. Adds the finishing touch to stair systems Based of original and historical designs Can be cut, drilled, screwed, or glued Factory primed and ready for paint or faux finish Solid urethane for maximum durablity and detail Can be used on the interior or exterior |
|
|
 |
Grandma’s Doilies Quartet III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-018-3 : USD102.35
Grandma’s Doilies Quartet III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-018-3 For use in a ceiling grid or direct mount Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
LOT # 1637 #222 (100 SQ FT) 25 PCS Black Glue up / Drop In PVC : USD349.75
Model #222 Black 25 pcs Glue up/Drop In pvc. Broken corners. No returns. |
|
|
 |
LOT # 1638 #LT Faux Leather Tile (18 SQ FT) 11 PCS White Glue up : USD352.00
Model #LT Faux Leather Tile White 11 pcs Glue up. Minimal damage. No returns. |
|
|
 |
LOT # 1639 #LT Faux Leather Tile (8 SQ FT) 5 PCS Antique Gold Glue up : USD160.00
Model #LT Faux Leather Tile Antique Gold 5 pcs Glue up. No returns. |
|
|
 |
Schoolhouse - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-019 : USD102.35
Schoolhouse - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-019 For use in a ceiling grid or direct mount Hand Painted Ceiling Tiles This ceiling tile is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture, ceiling fans, crown moldings, decorative accessories, etc. Can be used for interior and exterior settings. Can also be washed. This tile is made of PVC that last forever. Made in U.S.A. Fire rated. Limited lifetime warranty. Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
LOT # 1705 #222 24x48 (160 SQ FT) 20 PCS White Matte Glue up / Drop In : USD503.60
Model #222 White Matte 24x48 20 pcs Glue up/Drop In. Bent corners. No returns. |
|
|
 |
LOT # 1709 #232uw 24x48 (400 SQ FT) 50 PCS White Glue up / Drop In PVC : USD621.00
Model #232uw White 24x48 50 pcs Glue up/Drop In pvc. Bent corners. No returns. |
|
|
 |
LOT # 1714 #232uw 24x48 (400 SQ FT) 50 PCS White Glue up / Drop In PVC : USD621.00
Model #232uw White 24x48 50 pcs Glue up/Drop In pvc. Bent corners. No returns. |
|
|
 |
Schoolhouse II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-019-2 : USD102.35
Schoolhouse II - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-019-2 For use in a ceiling grid or direct mount Hand Painted Ceiling Tiles This ceiling tile is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture, ceiling fans, crown moldings, decorative accessories, etc. Can be used for interior and exterior settings. Can also be washed. This tile is made of PVC that last forever. Made in U.S.A. Fire rated. Limited lifetime warranty. Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
Bee Hive MirroFlex 4x8 / 4x10 Glue Up PVC 3D Wall Panels : USD184.01
Bee Hive MirroFlex 4x8 / 4x10 Glue Up PVC 3DWall Panels |
|
|
 |
LOT # 1682 #505 24x24 (100 SQ FT) 25 PCS Antique Copper Glue up / Drop In PVC : USD349.75
Model #505 Antique Copper 24x24 25 pcs Glue up/Drop In. Like new. No returns. |
|
|
 |
LOT # 1683 #505 24x24 (100 SQ FT) 25 PCS Antique Copper Glue up / Drop In PVC : USD349.75
Model #505 Antique Copper 24x24 25 pcs Glue up/Drop In. Like new. No returns. |
|
|
 |
Schoolhouse III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-019-3 : USD102.35
Schoolhouse III - FAD Hand Painted Ceiling Tile 24 in X 24 in - #CTF-019-3 For use in a ceiling grid or direct mount Hand Painted Ceiling Tiles This ceiling tile is fully hand painted by a professional artist. Finished in metallic colors to match chandeliers, lights fixture, ceiling fans, crown moldings, decorative accessories, etc. Can be used for interior and exterior settings. Can also be washed. This tile is made of PVC that last forever. Made in U.S.A. Fire rated. Limited lifetime warranty. Fine Art Deco collection tiles Our Fine Art Deco tiles come in a variety of designs and fit perfectly in all standard grid systems. Whether for businesses or your home, these tiles add a beautiful decorative element that is sure to last for years to come. With these tiles the possibilities are as expressive and vast as the designer in you. Material Our Fine Art Deco tiles are made from a thick .028" pvc vinyl plastic, so they are waterproof, stain and mildew resistant, and will last for years to come. The material also makes them easy to clean and you won't have the nasty water spots that occur on standard mineral fiber tiles. Sizes & Colors Our Fine Art Deco tiles are manufactured to fit all standard 15/16" - 1" t-bar ceiling systems and many come in a variety of colors. If you have a 2x4 grid ceiling, but would prefer the look of the 2x2 ceiling tiles, simply insert a 2' center t bar available online or at most local hardware stores...it's easy! Delivery Lead Time Per Quantity Please be advised that this is a hand painted job and there's a lot of time consuming doing it. 1 - 10 tiles: 7 - 21 days 11 - 50 tiles: 3-4 weeks 50 - 100 tiles: 4 - 6 weeks 100 - 300 tiles: 6 - 8 weeks 300 - 500 tiles: 8 - 10 weeks 500 + tiles: 2 months or over. Priority orders, please contact us. |
|
|
 |
DIY Vaulted Foam Crown Molding - 5 in. Wide 8 ft. Long - #CC 453V : USD20.16
8 feet (exactly 95.5 inches) 5 inches wide Easy DIY Installation ( Installs with painters caulk) Light Weight Corner Blocks Available Flat Back Made in USA Eco Friendly (Recyclable) No Nails or Fasteners Mounts to Most Surfaces Great for Wet Areas Does not Contract or Expand Download Fire Rating Class "A" Certificate DIY foam crown moldings are easy to cut and install with our flat back design. Designed for angled, cathedral, sloped and vaulted ceilings. (95.5" lengths). Our 4-1/2" Vaulted polystyrene foam crown moldings are a good size for 10-14+ foot ceiling heights. 8-9 foot is where the ceiling starts and goes upward. Mounting for our regular flat vaulted back moldings Installs on flat 45 degree downward ceilings Installs on flat 90 degree ceilings Installs on angled, sloped / ceilings up to 135 degrees Just slide it up the wall until the top of the molding comes in contact Use these corners on vaulted, angled and cathedral ceilings with the foam crown molding going up or down from 90-135 degrees. |
|
|