_(2).gif)
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|||
|
|
|||
|
|
 |
DigiTech DBM Bad Monkey Overdrive Guitar Effects Pedal : MusiciansFriend : USD49.95The DigiTech Bad Monkey Tube Overdrive Pedal gives your amp a boost right where you need it, sending your signal from clean to smooth, classic overdrive with character and dynamics. Low and High tone controls give you the flexibility to boost or cut the bass and treble frequencies for just the right sound. The Level knob boosts the output level of your signal, and the Gain knob controls the level of overdrive distortion. The Amp output runs into the input of your amplifier and the dedicated Mixer output has a cabinet emulation circuit that lets you run direct into a mixer or recorder when you don't want to lug your amp along. |
 |
DigiTech Screamin' Blues Overdrive Guitar Effects Pedal : MusiciansFriend : USD49.95The DigiTech Screamin' Blues Overdrive Distortion Pedal is designed for guitarists who need a pedal that gives them total control of their tone and is highly responsive to playing dynamics. Playing the Screamin' Blues pedal lightly produces mild overdrive, but dialing up the gain and digging in hard makes it sing with ultrarich harmonics and sustain. Low and High tone controls give you the flexibility to boost or cut the bass and treble frequencies. The Level knob boosts the output level of your signal, and the Gain knob dials up the distortion. An Amp output on the DigiTech Screamin' Blues pedal goes to your amplifier and the dedicated Mixer output has a cabinet emulation circuit that lets you run direct into a mixer or recorder when you don't want to lug your amp along. |
 |
DigiTech Hot Head Distortion Guitar Effects Pedal : MusiciansFriend : USD49.95The DigiTech Hot Head Distortion Pedal is what you want when you need some grit. The multipurpose Hot Head distortion pedal has flexible controls that let you dial in the right tone for your setup. If you want just a little dirt or you need your amp to sound like a raging stack, the DigiTech Hot Head Guitar Pedal can do it. Low and High tone controls give you the flexibility to boost or cut the bass and treble frequencies, the Level knob boosts the output level of your signal, and the Gain knob dials up mild to wild distortion. The Amp output runs into the input of your amplifier and the dedicated Mixer output has a cabinet emulation circuit that lets you run direct into a mixer or recorder when you don't want to lug your amp along. |
 |
DigiTech Grunge Distortion Guitar Effects Pedal : MusiciansFriend : USD49.95The DigiTech Grunge Distortion Pedal is designed for loud, distortion-obsessed guitarists who want an edge-of-chaos sound. The Grunge provides chunky rhythm, heavy grind, and amazing sustained leads. It's been a top seller for over a decade. Not buzzy like other metal pedals. Includes Loud (level), Low, High, and Grunge (distortion) controls, as well as an amp output and dedicated mixer output with cabinet emulation circuitry. |
 |
DigiTech DDM Death Metal Distortion Guitar Effects Pedal : MusiciansFriend : USD49.95The DigiTech Death Metal Distortion Pedal gives you the most extreme distortion you will ever hear. Simply put, the gain is turned up to eleven and then the knob is ripped off. Level, Low, Mid, and High tone controls provide flexible tone shaping so even though the distortion is over the top, your guitar is guaranteed to slice through. Low, Mid, and High tone controls give you the flexibility to boost or cut the bass, middle, and treble frequencies and the Level knob boosts the output level of your signal. An Amp output goes to your amplifier and the dedicated Mixer output has a cabinet emulation circuit that lets you run direct into a mixer or recorder when you don't want to lug your amp along. |
 |
DigiTech GNXFC Foot Controller : MusiciansFriend : USD39.95The Digitech GNXFC Foot Controller lets you simultaneously use the recorder and floor processor portions of the GNX3 Guitar Workstation and BNX3 Bass Workstation. The 3 footswitches on the GNXFC operate the Stop/Undo, Record, and Play transport controls of the Workstations' built-in digital 8-track recorders. This lets you use the GNX3 and BNX3's footswitches for quick preset changes while recording different tracks. The Digitech footswitch connects to the GNX3 or BNX3 with a single included cable. (See recommended accessories box on this page) |
 |
DigiTech Artist Series XAS-EC Eric Clapton Crossroads Guitar Multi Effects Pedal : MusiciansFriend : USD99.95DigiTech and Eric Clapton worked together to re-create seven of his most famous tones in the DigiTech Eric Clapton Crossroads Guitar Pedal. Using Production Modeling technology, everything from Eric's speaker cabs to the recording engineer's magic come together to give you the sound of Slowhand himself. |
 |
DigiTech DF-7 Distortion Factory Modeling Pedal : MusiciansFriend : USD99.95With the DigiTech DF-7 Distortion Factory Modeling Pedal you can have a satisfying smorgasbord of 7 screaming effects pedals in one stomp box. Distortion pedals are as important to the world of guitar playing as guitar playing is to modern music. So how do you get a whole spectrum of distortion tones? You can spend a fortune on individual stompboxes (and have a pedal board the size of Pennsylvania) or you can put the X-Series DF-7 Distortion Factory to work for you.Now you can have tones from the Ibanez TS-9 Tube Screamer, EH Big Muff pi, Pro Co Rat, Metal Zone, and DOD Overdrive/Preamp 250 with a ton of EQ control to shape their sounds the way you want them. That's because the DF-7 features 3 dual concentric tone controls so you can customize each model with High, Mid Freq, Mid, and Low EQ, in addition to Gain and Level. The DF-7 sounds so good because it isn't just pedal models. The sounds modeled are the pedal interacting with the cabinet and tube characteristics of classic amps associated with each pedal. It's this combination that truly distinguishes the DigiTech DF-7 and puts its sounds leagues beyond most distortion stompbox modelers. |
 |
DigiTech BP50 Bass Floor Modeling Pedal : MusiciansFriend : USD79.95The affordable, quality DigiTech BP50 Bass Floor Modeling Pedal will expand your bass horizons. It provides an extensive range of basic sounds via 11 award-winning amp models. Next it adds 20 of the hottest bass effects (up to 8 at once) to warp your sound into new creative zones. Added to this are 5 stompbox models, fretless simulation, cab modeling, and an expression pedal input for volume, wah, and whammy. Then to make practice more fun and effective, this DigiTech pedal adds 30 drum patterns with variable tempo.24-bit A/D/A converters deliver clean, clear, full sound with accuracy between inputs and outputs. 40 factory/40 user presets give you plenty of realtime control. A 13-LED wide-range tuner with easy-reading display makes precise tuning a breeze. The pedals are separated to prevent accidental stomps. The DigiTech BP50 is one fantastic tool for both practice and gigs. |
 |
DigiTech Vx400 Vocal-Modeling Floor Processor : MusiciansFriend : USD249.95Use the DigiTech Vx400 Vocal-Modeling Floor Processor as a vocal floor processor onstage and for digital recording of voices or instruments in the studio. It's a full-featured vocal processor with a mic preamp, 16 mic models, multiple vocal character selections, a full-function compressor, and 3-band EQ.It can also be used as a multi-effects processor for voices or instruments with chorus, flanger, phaser, vibrato, pitch shift, detune, Whammy, delay, and reverb.It has a USB audio interface for streaming your tone to the computer, stereo line level inputs and outputs for recording instruments, balanced XLR outputs. Included Cakewalk custom software give you a complete repertoire of recording capabilities. You can even reprocess dry recorded tracks back through its modeling and effects.Built-in expression pedal, 40 user/40 factory presets, rugged aluminum chassis, and jam-along input.Includes power supply and custom Cakewalk recording software. |
 |
DigiTech BP80 Bass Multi-Effect Pedal : MusiciansFriend : USD99.95The DigiTech BP80 Bass Multi-Effect Pedal is built around the AudioDNA DSP super chip. It features 11 award-winning amp models, 5 stompbox models, a fretless simulation, cab modeling, and 20 of the hottest bass effects (up to 8 at once), mean this floor unit can warp your sound in seemingly endless ways. Added to this is an expression pedal, 30 drum patterns with variable tempo, 24-bit A/D/A converters, an easy-to-use tuner, and 40 factory/40 user presets. Digitech includes a power supply with the BP80. |
 |
DigiTech GNX4 Guitar Multi Effects Pedal : MusiciansFriend : USD399.95The Digitech GNX4 Guitar Multi Effects Pedal features a built-in MIDI drum machine that rivals standalone units and includes a vast library of high-quality kits and patterns. It also lets you use your own MIDI files, and the GNX4 pedal can also playback MP3s, download lessons from guitar magazines, and has 8-track digital recording that can be operated with foot controls. It records to a CompactFlash card (not included) for later transfer to computer via a USB connection. Pro Tracks Plus software for PC or Bias Deck 3.5SE software for Mac are included. These allow you to stream 4 channels of 24-bit audio to the computer while simultaneously listening to 2 channels of playback with zero latency. For the finishing touch, process your work through world-class Lexicon reverbs courtesy of the Pantheon reverb plug-in. With 35 factory presets, 6 reverb types, and a simple yet powerful user interface, Pantheon is an indispensable tool for your recording work. |
 |
Hughes & Kettner Tube Factor Overdrive Pedal : MusiciansFriend : USD349.00By feeding sufficient juice (upwards of 300V) to its tube-based tone circuitry, this pedal gives you the real thing: a warm tube clean sound and a blistering, saturated-tube lead sound. Both are available at the press of a switch. The Tube Factor is the key to getting the hottest lead sounds from vintage amps and genuine tube tone from solid state combos. In effect, it expands any amp with an additional channel. |
 |
Hughes & Kettner Warp Factor Nu-Metal Distortion Pedal : MusiciansFriend : USD29.99Small, black, and mean, the Hughes & Kettner Warp Factor Nu-Metal Distortion Pedal injects your sound with pure, dark energy. Set the selector to Combo or Half-stack, insert the Warp Factor between your guitar and your amp's clean channel, and it dishes up heavy chunks of that drop-D tone. |
 |
Rolls CT1 Cable Detective : MusiciansFriend : USD49.99The Rolls CT1 Cable Detective tests and detects shorted or open cables of all kinds: 1/4" TS, 1/4" TRS, RCA, XLR, or combos of these. |
 |
Behringer CT-100 CABLE TESTER Regular : MusiciansFriend : USD29.99A studio, sound tech, road crew must have. |
 |
Behringer FCV100 Dual Mode Footcontroller : MusiciansFriend : USD24.99The Behringer FCV100 Dual-Mode Footcontroller features volume control of one stereo or 2 mono individual musical instruments. Its dedicated modulation function provides a direct connection to a keyboard's modulation control input. VCA controlled for utmost reliability and smooth audio performance. Adjustable minimal volume. Uses standard 9V battery. Low battery indicator. Ultracompact, road-suitable housing. High-quality components and exceptionally rugged construction ensure long life and durability. |
 |
Behringer Ultra-G GI100 DI : MusiciansFriend : USD49.99The Behringer Ultra-G GI100 DI Box features a switchable speaker simulation that so realistically emulates a 4x12 cab you may never mic your speakers again. Features include switchable input attenuation allowing levels of up to +48dBu, a ground lift switch to eliminate loop problems, and a rugged roadproof aluminum case. An internal battery automatically shuts off when phantom power is connected. |
 |
Dunlop Original Crybaby Wah Pedal : MusiciansFriend : USD69.99If you play the real thing - the Dunlop Original Crybaby - you get the real sound. The heavy die-cast steel construction of this stomp box can take all the stompin' you've got in you. Totally smooth, silent, consistent, and easy to control. Made in the USA. Uses optional ECB03 power supply. |
 |
Dunlop GCB-80 High Gain Volume Pedal : MusiciansFriend : USD99.99The Dunlop GCB-80 High Gain Volume effects pedal has a heavy die-cast housing and is built to be trod upon for as many years as you have in you. One-million cycle potentiometer is quiet, smooth, and designed for extended use. Passive design requires no power input. |
 |
Dunlop DB-01 Dimebag Crybaby From Hell : MusiciansFriend : USD149.99The Dunlop DB-01 Dime Crybaby From Hell is a hot-rodded wah with an extended sweep so you can get more high end with the pedal down or low end with the pedal up. A 5-way selector on the side lets you choose which frequency you want to play with and also features a kick-in boost. LED indicators inform you of status, even on darkened stages. An extra input on the left lets you go in and out on the same side. Controls include an adjustable volume boost (0 to +17dB). An adjustable Q control modulates frequency breadth and a fine tune knob lets you adjust the toe down sweep range. It sounds bad and with camo graphics, it looks bad. |
 |
Dunlop Crybaby 535Q Multi-Wah Pedal : MusiciansFriend : USD129.99The Dunlop Crybaby 535Q Multi-Wah Pedal allows you to customize and shape the sound of the wah. It takes you from a narrow, sharp wah to a broad, subtle wah with a simple turn of the Q dial. Also offers 6 guitar wah ranges with a variable boost from 0 to +16dB and a hard-wired on/off switch. New custom circuitry consumes less power and eliminates unwanted distortion. |
 |
Dunlop SW-95 Crybaby Slash Wah Pedal : MusiciansFriend : USD169.99Like the guitarist himself, the Dunlop SW-95 Slash Wah is revolutionary and a classic at the same time. It sports a hot rod, metallic-red finish and a cutting edge, high gain circuit for a different and distinct sound. It also has a modified Fasel inductor for sweet, singing top end and upper midrange bite and sparkle on the wah. 18V operation yields tons of extra headroom. LED indicators for distortion on/off and wah on/off modes keep you clued in at all times. Top hat not included. |
 |
MXR M235 Smart Gate Pro : MusiciansFriend : USD399.99The brilliant MXR M235 Smart Gate Pro rack piece is the big brother to the Smart Gate pedal. The Smart Gate Pro features the same great noise reduction as the pedal, with three selectable ranges (Hiss, Mid and Full) and a precise threshold trigger. |
 |
Dunlop Crybaby Classic Fasel Inductor Wah Pedal : MusiciansFriend : USD99.99Classic wah-wah sounds from the '60s rise again from the heavy-duty, die-cast Dunlop Crybaby Classic Fasel Inductor Wah Pedal. This pedal features the legendary Fasel inductor, which was the key to the tone, sweep, and voice of the very first Crybaby. Dunlop has gained exclusive distribution rights to these components, so guitarists the world over can rediscover the lost tone of the original Crybaby/Fasel wah pedal. The Dunlop Crybaby Classic Wah Pedal features a 100kOhm Hot Potz potentiometer for quick, abrupt wah sounds. |
 |
Foxx Tone Machine Black : MusiciansFriend : USD199.00The original Foxx Tone Machine guitar effects unit came out in 1971 and was made for only a few years, but its fat-backed, fuzzed-out sound has made it a coveted piece ever since. It has been a favorite of such guitarists as Peter Frampton and Adrian Belew, and it has shaped the sound of bands from Parliament/Funkadelic to Nine Inch Nails. Now it is back, with perfectly replicated analog circuitry. Assembled in the USA, the Tone Machine's controls include volume, sustain, and and Mellow/Bright fuzz tone knobs, and an octave/sustain switch. Operates on one 9-volt battery. |
 |
Foxx Tone Machine Green : MusiciansFriend : USD199.00The original Foxx Tone Machine guitar effects unit came out in 1971 and was made for only a few years, but its fat-backed, fuzzed-out sound has made it a coveted piece ever since. It has been a favorite of such guitarists as Peter Frampton and Adrian Belew, and it has shaped the sound of bands from Parliament/Funkadelic to Nine Inch Nails. Now it is back, with perfectly replicated analog circuitry. Assembled in the USA, the Tone Machine's controls include volume, sustain, and and Mellow/Bright fuzz tone knobs, and an octave/sustain switch. Operates on one 9-volt battery. |
 |
Foxx Tone Machine Blue : MusiciansFriend : USD199.00The original Foxx Tone Machine guitar effects unit came out in 1971 and was made for only a few years, but its fat-backed, fuzzed-out sound has made it a coveted piece ever since. It has been a favorite of such guitarists as Peter Frampton and Adrian Belew, and it has shaped the sound of bands from Parliament/Funkadelic to Nine Inch Nails. Now it is back, with perfectly replicated analog circuitry. Assembled in the USA, the Tone Machine's controls include volume, sustain, and and Mellow/Bright fuzz tone knobs, and an octave/sustain switch. Operates on one 9-volt battery. |
 |
Foxx Tone Machine Red : MusiciansFriend : USD199.00The original Foxx Tone Machine guitar effects unit came out in 1971 and was made for only a few years, but its fat-backed, fuzzed-out sound has made it a coveted piece ever since. It has been a favorite of such guitarists as Peter Frampton and Adrian Belew, and it has shaped the sound of bands from Parliament/Funkadelic to Nine Inch Nails. Now it is back, with perfectly replicated analog circuitry. Assembled in the USA, the Tone Machine's controls include volume, sustain, and and Mellow/Bright fuzz tone knobs, and an octave/sustain switch. Operates on one 9-volt battery. |
 |
Foxx Tone Machine Yellow : MusiciansFriend : USD199.00The original Foxx Tone Machine guitar effects unit came out in 1971 and was made for only a few years, but its fat-backed, fuzzed-out sound has made it a coveted piece ever since. It has been a favorite of such guitarists as Peter Frampton and Adrian Belew, and it has shaped the sound of bands from Parliament/Funkadelic to Nine Inch Nails. Now it is back, with perfectly replicated analog circuitry. Assembled in the USA, the Tone Machine's controls include volume, sustain, and and Mellow/Bright fuzz tone knobs, and an octave/sustain switch. Operates on one 9-volt battery. |
 |
Foxx Tone Machine Purple : MusiciansFriend : USD199.00The original Foxx Tone Machine guitar effects unit came out in 1971 and was made for only a few years, but its fat-backed, fuzzed-out sound has made it a coveted piece ever since. It has been a favorite of such guitarists as Peter Frampton and Adrian Belew, and it has shaped the sound of bands from Parliament/Funkadelic to Nine Inch Nails. Now it is back, with perfectly replicated analog circuitry. Assembled in the USA, the Tone Machine's controls include volume, sustain, and and Mellow/Bright fuzz tone knobs, and an octave/sustain switch. Operates on one 9-volt battery. |
 |
BBE Supa-Charger Guitar Pedal Power Supply : MusiciansFriend : USD149.99A universal high performance guitar effects pedal power supply, the Supa-Charger includes eight isolated, regulated, and filtered outputs, a toroidal transformer for zero-hum performance, and a selectable input voltage (110-220), enabling it to be used worldwide.Two of the eight outputs can be configured for 16V operation (5 & 6), while the others can be 9V or 12V via DIP switches. Includes eight 2.1mm, 2' (black) and two 2.5mm 2' (red) power cables. Also includes an IEC power cord. |
 |
BBE Mind Bender Analog Chorus/Vibrato Pedal : MusiciansFriend : USD149.99The Mind Bender is a dual-mode analog Vibrato/Chorus pedal that uses the BBD (Bucket Brigade Delay) circuit and was patterned after two rare vintage guitar effects pedals: the Boss VB-2 Vibrato™ (Pitch Vibrato) and Way Huge Electronics' Blue Hippo™ (Analog Chorus). The Mind Bender produces a wide range of lush vibrato/chorus and rotating speaker effects. |
 |
BBE Soul Vibe Pedal : MusiciansFriend : USD129.99The Soul Vibe is an analog Uni-Vibe™ style effect. The Uni-Vibe™ was known for its phase-like rotary speaker emulation made popular in the late '60s and early '70s by such players as Jimi Hendrix, David Gilmour, and Robin Trower. |
 |
Visual Sound Visual Volume Pedal : MusiciansFriend : USD139.95With the die-cast aluminum Visual Volume, the rocker position is indicated by a column of ten LEDs. With the rocker fully back (toe up, heel down) all of the lights are off and so is the volume. As you rock your foot forward, the indicators light up one by one until all 10 are lit. When all lights are on, you're at maximum volume. To find your level at a glance, LEDs 1-4 are blue, 5 is red, 6-9 are blue again, and 10 is red.The Visual Volume Pedal operates on 9V battery or an optional power supply. It will function passively without power though the LEDs will be inoperative. Visual Volume recommends using a high-quality regulated 9VDC adapter like the 1 Spot. Boss PSA, Dunlop ECB-03, Ibanez AC-109, and Morley 9V also acceptable. The Visual Volume pedal is easy to service. If you ever wear out the control pot, Visual Volume has a kit to restore your pedal to like new service. Many users are even able to make the switch themselves.Inputs and Outputs Input 1 and Output 1 are all you need for mono volume control. Tuner Out: Even with the volume all the way down, the tuner out still sends volume to your tuner, allowing you to tune silently without switching any cables around. If you don't plug into Input 2, both Outputs send the signal from Input 1, so you can plug into 2 different amps at the same time. Plug into inputs 1 & 2, and the Visual Volume becomes a stereo volume pedal. Great if you put a Stereo Chorus pedal in front of the Visual Volume. Or, plug 2 guitars into the Visual Volume and you can make quick guitar changes without unplugging. Other adjustments With the removal of the bottom plate on your pedal you can set the pedal for active or passive mode, adjust pedal tension, and in active mode, individually set the gain for each input. |
 |
Fishman Aura Dreadnought Acoustic Guitar Imaging Pedal : MusiciansFriend : USD199.95The Aura Dreadnought acoustic guitar Imaging Pedal uses Fishman's exclusive Aura Acoustic Imaging Technology in a familiar effects pedal format, finally allowing acoustic guitarists to easily and accurately reproduce the sound of their instrument as miked in a professional studio.Easy to set up and use, Aura pedals eliminate intrusive stage noise and expensive microphone setups, allowing guitarists to achieve incredible recordings at home or in any live performance setting. Designed for use with guitars featuring undersaddle or magnetic soundhole pickups, this Aura Dreadnought Pedal is specifically designed for use with standard flat top and full size acoustic guitars.The Aura Imaging pedal features 16 Images, selected from their vast online library to cover a wide range of the most popular acoustic guitar models. A deliberately simple and intuitive control set offers Volume, Blend, and Phase allowing simple operation at home or on stage.Aura uses digital algorithms, developed in Fishman's audio labs, to create an image of the natural sound that microphones capture in a professional studio. This Image, when played through an amp, mixer, or PA, blends with your instrument's pickup to produce an immediate and dramatic improvement in your amplified sound.For the highest audio quality, the Aura Acoustic Imaging Pedal features 24-bit A/D D/A and 32-bit internal processing, and runs on a 9V battery or AC power adapter.The Fishman Aura Imaging Pedal looks great, too. It features the look of brushed steel top and bottom, and a black center section where the jacks are located. |
 |
Fishman Aura Jumbo Acoustic Guitar Imaging Pedal : MusiciansFriend : USD199.95The Aura Jumbo acoustic guitar Imaging Pedal uses Fishman's exclusive Aura Acoustic Imaging Technology in a familiar effects pedal format, finally allowing acoustic guitarists to easily and accurately reproduce the sound of their instrument as miked in a professional studio.Easy to set up and use, Aura pedals eliminate intrusive stage noise and expensive microphone setups, allowing guitarists to achieve incredible recordings at home or in any live performance setting. Designed for use with guitars featuring undersaddle or magnetic soundhole pickups, this Aura Jumbo Pedal is specifically designed for use with for large body flat top acoustic guitars.The Aura Imaging pedal features 16 Images, selected from their vast online library to cover a wide range of the most popular acoustic guitar models. A deliberately simple and intuitive control set offers Volume, Blend, and Phase allowing simple operation at home or on stage.Aura uses digital algorithms, developed in Fishman's audio labs, to create an image of the natural sound that microphones capture in a professional studio. This Image, when played through an amp, mixer, or PA, blends with your instrument's pickup to produce an immediate and dramatic improvement in your amplified sound.For the highest audio quality, the Aura Acoustic Imaging Pedal features 24-bit A/D D/A and 32-bit internal processing, and runs on a 9V battery or AC power adapter.The Fishman Aura Imaging Pedal looks great, too. It features the look of brushed steel top and bottom, and a black center section where the jacks are located. |
 |
Fishman Aura Concert Acoustic Guitar Imaging Pedal : MusiciansFriend : USD199.95The Aura Concert acoustic guitar Imaging Pedal uses Fishman's exclusive Aura Acoustic Imaging Technology in a familiar effects pedal format, finally allowing acoustic guitarists to easily and accurately reproduce the sound of their instrument as miked in a professional studio.Easy to set up and use, Aura pedals eliminate intrusive stage noise and expensive microphone setups, allowing guitarists to achieve incredible recordings at home or in any live performance setting. Designed for use with guitars featuring undersaddle or magnetic soundhole pickups, this Aura Concert Pedal is specifically designed for use with smaller body guitars like a 00, Concert and Grand Concert acoustic guitars.The Aura Imaging pedal features 16 Images, selected from their vast online library to cover a wide range of the most popular acoustic guitar models. A deliberately simple and intuitive control set offers Volume, Blend, and Phase allowing simple operation at home or on stage.Aura uses digital algorithms, developed in Fishman's audio labs, to create an image of the natural sound that microphones capture in a professional studio. This Image, when played through an amp, mixer, or PA, blends with your instrument's pickup to produce an immediate and dramatic improvement in your amplified sound.For the highest audio quality, the Aura Acoustic Imaging Pedal features 24-bit A/D D/A and 32-bit internal processing, and runs on a 9V battery or AC power adapter.The Fishman Aura Imaging Pedal looks great, too. It features the look of brushed steel top and bottom, and a black center section where the jacks are located. |
 |
Fishman Aura Orchestra Acoustic Guitar Imaging Pedal : MusiciansFriend : USD199.95The Aura Orchestra acoustic guitar Imaging Pedal uses Fishman's exclusive Aura Acoustic Imaging Technology in a familiar effects pedal format, finally allowing acoustic guitarists to easily and accurately reproduce the sound of their instrument as miked in a professional studio.Easy to set up and use, Aura pedals eliminate intrusive stage noise and expensive microphone setups, allowing guitarists to achieve incredible recordings at home or in any live performance setting. Designed for use with guitars featuring undersaddle or magnetic soundhole pickups, this Aura Orchestra Pedal is specifically designed for use with midsize guitars like OM and Auditorium models.The Aura Imaging pedal features 16 Images, selected from their vast online library to cover a wide range of the most popular acoustic guitar models. A deliberately simple and intuitive control set offers Volume, Blend, and Phase allowing simple operation at home or on stage.Aura uses digital algorithms, developed in Fishman's audio labs, to create an image of the natural sound that microphones capture in a professional studio. This Image, when played through an amp, mixer, or PA, blends with your instrument's pickup to produce an immediate and dramatic improvement in your amplified sound.For the highest audio quality, the Aura Acoustic Imaging Pedal features 24-bit A/D D/A and 32-bit internal processing, and runs on a 9V battery or AC power adapter.The Fishman Aura Imaging Pedal looks great, too. It features the look of brushed steel top and bottom, and a black center section where the jacks are located. |
 |
Boss RT-20 Rotary Speaker Sound Processor : MusiciansFriend : USD199.00Guitar legends from Santana to the Beatles have incorporated the rotary speaker into their music. BOSS kept this in mind when creating the RT-20, and by employing their COSM modeling technology, it reproduces classic rotary sounds just like the originals. Adjustable Rise Time, Horn and Bass speed, Overdrive, and more. Not just for the classic swirl, the RT-20 can create unique overdrive and pulsating effects as well. Amazing sound plus a stunning graphical view of the virtual rotors in its display. |
 |
Boss FV-500L Stereo Volume Pedal : MusiciansFriend : USD99.00Stylish design, a road-tough build, and comfortable, smooth action. Expression output for use with expression-compatible amps, effects, and even synthesizers. |
 |
Boss FV-500H Mono Volume Pedal : MusiciansFriend : USD89.00Stylish design, a road-tough build, and comfortable, smooth action. Expression output for use with expression-compatible amps, effects, and even synthesizers. |
 |
Boss AC-3 Acoustic Simulator : MusiciansFriend : USD99.00BOSS is pleased to offer another "Authentic BOSS" Compact Pedal; the AC-3. How many times have you been onstage or in the studio with your electric guitar, and wished that you'd brought an acoustic along? For musicians who travel light, hauling an extra guitar isn't practical. The AC-3 gives electric guitarists an acoustic effect with a tap of the pedal. BOSS's COSM Acoustic-Modeling technology is beautifully showcased in this small but powerful pedal, which simulates an acoustic guitar much more precisely and realistically than previous technology has allowed. Derived from BOSS top-of-the-line AD-8, the AC-3 pedal simulates the sound of an acoustic guitar with incredible precision. Four simulation modes are provided: Standard, Jumbo, Enhanced, and Piezo-equipped; the latter supplies that famous "cut through the mix" direct piezo sound. Previous compact acoustic-guitar modeling-pedals were promising, but now the bar has been raised with Boss AC-3. |
 |
Boss RC-50 Loop Station : MusiciansFriend : USD499.00The RC-50 is the most feature-laden Loop Station BOSS has ever built. With its seven footswitches you can manipulate three stereo phrase tracks simultaneously. Each track supports multiple overdubs, so phrases can be stacked one by one on each track, resulting in a monstrous layer of looped phrases.Powerful tools for live performance For bands that incorporate digital audio tracks, sequences, drum machines, and/or video elements into their live gigs, sync is not a luxury - it's a necessity. The RC-50 can be locked to an external MIDI clock source, ensuring that its loop performances are absolutely locked to the rest of the show. Internally, the RC-50 offers Loop Quantize for easy loop recording, plus Loop Sync (which enables all phrases to start in sync) and Tempo Sync (which matches the tempo of multiple phrases during playback). Rhythm Guide To make recording as fun and inspiring as possible, the RC-50 provides a total of 379 play-along Rhythm Guide Patterns using real sampled drums in a wide variety of time signatures.Impressive I/O The RC-50's rear panel offers a variety of inputs (stereo Instrument ins, XLR input with 48V phantom power, mini-jack aux), outputs (1/4" stereo, 1/4" sub stereo outs, headphone out), and USB for importing WAV files from computers. MIDI in and out jacks are provided, as are 1/4" TRS inputs for accommodating an optional expression pedal and footswitches; up to four footswitches can be used simultaneously. |
 |
Fishman Aura 12 String Acoustic Guitar Imaging Pedal : MusiciansFriend : USD199.95The Aura 12 String acoustic guitar Imaging Pedal uses Fishman's exclusive Aura Acoustic Imaging Technology in a familiar effects pedal format, finally allowing acoustic guitarists to easily and accurately reproduce the sound of their instrument as miked in a professional studio.Easy to set up and use, Aura pedals eliminate intrusive stage noise and expensive microphone setups, allowing guitarists to achieve incredible recordings at home or in any live performance setting. Designed for use with guitars featuring undersaddle or magnetic soundhole pickups, this Aura 12 String Pedal is specifically designed for use with 12-string acoustic guitars.The Aura Imaging pedal features 16 Images, selected from their vast online library to cover a wide range of the most popular acoustic guitar models. A deliberately simple and intuitive control set offers Volume, Blend, and Phase allowing simple operation at home or on stage.Aura uses digital algorithms, developed in Fishman's audio labs, to create an image of the natural sound that microphones capture in a professional studio. This Image, when played through an amp, mixer, or PA, blends with your instrument's pickup to produce an immediate and dramatic improvement in your amplified sound.For the highest audio quality, the Aura Acoustic Imaging Pedal features 24-bit A/D D/A and 32-bit internal processing, and runs on a 9V battery or AC power adapter.The Fishman Aura Imaging Pedal looks great, too. It features the look of brushed steel top and bottom, and a black center section where the jacks are located. |
 |
Fishman Aura Nylon String Acoustic Guitar Imaging Pedal : MusiciansFriend : USD199.95The Aura Nylon acoustic guitar Imaging Pedal uses Fishman's exclusive Aura Acoustic Imaging Technology in a familiar effects pedal format, finally allowing acoustic guitarists to easily and accurately reproduce the sound of their instrument as miked in a professional studio.Easy to set up and use, Aura pedals eliminate intrusive stage noise and expensive microphone setups, allowing guitarists to achieve incredible recordings at home or in any live performance setting. Designed for use with guitars featuring undersaddle or magnetic soundhole pickups, this Aura Nylon Pedal is specifically designed for use with nylon string classical guitars.The Aura Imaging pedal features 16 Images, selected from their vast online library to cover a wide range of the most popular acoustic guitar models. A deliberately simple and intuitive control set offers Volume, Blend, and Phase allowing simple operation at home or on stage.Aura uses digital algorithms, developed in Fishman's audio labs, to create an image of the natural sound that microphones capture in a professional studio. This Image, when played through an amp, mixer, or PA, blends with your instrument's pickup to produce an immediate and dramatic improvement in your amplified sound.For the highest audio quality, the Aura Acoustic Imaging Pedal features 24-bit A/D D/A and 32-bit internal processing, and runs on a 9V battery or AC power adapter.The Fishman Aura Imaging Pedal looks great, too. It features the look of brushed steel top and bottom, and a black center section where the jacks are located. |
 |
Eventide ModFactor Modulation Guitar Effects Pedal : MusiciansFriend : USD399.00The Eventide Modfactor features 10 modulation effects available in mono or stereo, including Phaser, Flanger, Chorus, Polymod, TremoloPan, Undulator, Vibrato, Q-Wah, ModFilter and RingMod. With studio quality sound and extremely flexible control options, you may never need another modulation effects pedal. 10 knobs provide instant real-time control of all the most commonly adjusted parameters, and optional controls via MIDI or expression pedal keep the full power of the Modfactor within easy reach.Tap Tempo and MIDI clock sync blend effects seamlessly into any song, and 27 user presets (unlimited presets through MIDI) make it unnecessary to make notes and drawings to find that perfect setup every time.Rugged cast metal construction means your Modfactor is ready for the road, and guitar or line-level inputs make it incredibly flexible.Through the decades, top players have depended on Eventide: Jimmy Page, Frank Zappa, Brian May, Eddie Van Halen, Steve Vai, Robert Fripp, John Petruccl, and Adrian Belew to name a few. Now these effects are portable and affordable. Stompbox simple, ModFactor fits on your pedalboard or in your gigbag.NO LlMITS Flexibility Built-in Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and my parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly to a wide variety of amps and other foot pedals.NO COMPROMISE Studio Quality Effects at your feet Top recording studios worldwide use Eventide effects on hit after hit. ModFactor includes Eventide's 10 best modulation effects from m the past 35 years without compromising qualify OR flexibility.NO DEAD ENDS Obsolescence is so 20th Century Eay to upgrade; download new software from the Internet and install via USB. |
 |
MXR M-115 Distortion III Pedal : MusiciansFriend : USD79.99Developed from the ground up using carefully selected components, the Distortion III pedal delivers everything from sweet singing overdrive to massive distortion crunch! It's natural and amp-like distortion is versatile enough to appeal to any playing style and transparent enough to let your guitar's personality shine through. Like all MXR pedals, the Distortion III features a heavy-duty casing, switch and jacks for a lifetime of use.The initials MXR are synonymous with the effects pedal innovations that have shaped the tone of modern electric guitar. Since the 1970's, MXR has produced some of the best stomp boxes available; now comes the inspired MXR Distortion III. Starting with its proprietary circuit design that delivers rich harmonic content, the D-III carries on the MXR tradition of tough, rugged and tonally tasty stomp boxes. With its die cast chassis, robust stomp switch and carefully selected components the D-III guitar effects pedal is truly a modern day classic. |
 |
MXR CSP-101CL Custom Shop Script Phase 90 with LED Phaser Pedal : MusiciansFriend : USD99.99Often imitated but never duplicated, the elusive vintage MXR Phase 90 guitar pedal is at the top of the list for pedal collectors world-wide. The original version available from the company's inception to the late 70's practically defined the classic phase shifter sound, and was heard on everything from hard rock, jazz-fusion, to funk hits. This MXR Custom Shop Script Phase 90 brings back the headroom and clarity of the original, along with its ultra warm and smooth phasing and reduced midrange swell. And the pedal comes dressed in the original smooth orange paint job and script logo, with an LED, direct from the MXR Custom Shop. |
 |
MXR CSP-021 GT-OD Overdrive Pedal : MusiciansFriend : USD99.99Built from the ground up with the best available components, the MXR Custom Shop GT-OD Overdrive pedal creates smooth, warm, and classic overdrive without excess noise or tone coloring. The simple controls make it easy to dial in a great tone quickly—from crunchy rhythm tone with chord clarity—to sparkly and harmonic-rich lead tones with tons of sustain. One of the most organic, responsive and open sounding overdrives in existence. Available only from the MXR Custom Shop. A traditional overdrive that provides powerful, cutting, transparent overdrive tone with great definition Adds sustain and gain without adding excess noise Place in front of an overdriven amp for screaming lead tones Indestructible die-cast housing |
 |
Koch DJ-1 MIDI Adapter Black : MusiciansFriend : USD149.00This adapter box comes with a 16' extension cable for connecting a MIDI switcher to the Koch Multi/Powertone Guitar Amplifiers. |
 |
Koch CFS-5 Footswitch Extension Cable Black : MusiciansFriend : USD73.005 meter (16') extension cable for the CFS footwitch that works with the Koch Power/Multitone guitar amplifiers. |
 |
TC Electronic Classic Series Sustain + Parametric EQ Equalizer Pedal : MusiciansFriend : USD299.00The Classic Sustainer + Parametric EQ gives you studio quality compression in a guitar pedal. Crank it to the extreme and it'll give your sound that percussive "thud" brilliant for funk or country. And with its parametric EQ you're in full control of which frequencies to target.One of the true grails of vintage effects pedals. This one really enhances your tone. Go from subtle compression to extreme sustaining effects at the tweak of a knob. This sustainer will prolong life of even your weakest tone otherwise destined for premature death.Controls Sustain- Sets the amount of sustain. Freq Center- Sets the center frequency to be attenuated or boosted by the Function control. Function- From notch filter type to peak filter type. Notch settings will attenuate frequencies around the Freq Center. Peak settings will emphasize the selected frequency area. High Q- The "Q" value switch allows you to alternate between two different curve-widths. If you are looking to attenuate an annoying frequency you should most likely use the notch filter type with a narrow Q (out position). If, on the other hand, you are aiming to make general adjustments in a frequency area, the wider Q setting should be used (in position). Experiment. Output Level - Controls the overall output level of the pedal. Noise Gate- The Classic Sustain+Parametric EQ comes with a built-in noise gate that can eliminate unwanted noise deriving from pedals placed previous in the signal chain or noise coming from the Classic Sustain+Parametric EQ itself when extreme settings are used. The single control adjusts the Threshold point. Attack and Release parameters have fixed settings based on common applications. |
 |
TC Electronic Classic Series Booster + Distortion Pedal : MusiciansFriend : USD299.00Whether you use this TC Electronic pedal as an always-on signal booster to make your tubes work harder, as an occasional boost for highlighting a solo, lick or passage or as a distortion pedal to go with a clean amp, it will always stay true to your tone with absolutely no coloration or degradation of the original signal.The built-in noise gate holds feedback in a firm leg lock only letting through the boosted, yet uncolored, roaring signal from your strokes.Controls Noise Gate: Threshold setting for the built-in Noise Gate. Using a gate is always a compromise between eliminating the noise when you are not playing yet still being able to play phrases with a low dynamic content. Experiment to find the best setting for your setup. Boost/Distortion: Selects boost or distortion function. Use boost for a clean boost that will raise the level on clean/crunch sounds and use the distortion to experience the classic distortion that gives you a fat easy to control distortion sound. Distortion: Sets the amount of distortion when the pedal is used in distortion mode. Bass: Add a bit of bass for extra punch or attenuate if you feel you are about to blow your speakers. Treble: Adding boost or distortion to a sound always changes the perceived amount of treble. Use the Treble control to adjust the amount of high-end frequencies in the sound. Output Level - Sets the overall output level for both the distortion and boost modes. |
 |
Vox V847A Wah Pedal : MusiciansFriend : USD89.00The V847A Wah Pedal is a reissue of the wah that changed electric guitar sounds in the '60s. It is built to the exact specifications of the original pedal used by the most influential rock guitarists of all time-totally authentic from its classy chrome top to its legendary growl. |
 |
Morley Volume Plus Pedal : MusiciansFriend : USD84.99The Morley Volume Plus was developed from many user requests for a switchable Minimum Volume control. Minimum Volume control allows users to use the volume guitar pedals for either a Lead/Rhythm pedal or a standard Volume control pedal. Electro-Optical Volume foot pedal is consistent and studio quiet (no pots to wear out). AUDIO taper allows smooth volume control or violin type swells. Minimum Volume knob is used for a smooth transition between rhythm and lead volumes. Works with Guitar, Bass, Keys or any other instrument you need to control volume on.Some found it inconvenient to have to turn down the Min Vol knob and then have to reset it when using either function. Now, the Minimum Volume feature is foot switchable so it can easily be used as Lead/Rhythm pedal or Volume pedal. |
 |
Diaz Texas Square Face Fuzz : MusiciansFriend : USD224.99Originally designed as a more reliable replacement for Stevie Ray Vaughan's fuzz face, the Diaz Texas Square Face Fuzz has plenty of vibe of its own. Cesar Diaz built his circuit into one of SRV's dead fuzz face boxes and Stevie used it for the rest of his life. The production model features sturdy metal construction, on/off button, volume control, and fuzz control. |
 |
Diaz Texas Ranger Treble Boost : MusiciansFriend : USD224.99The Diaz Texas Ranger Treble Boost is based on the Dallas Rangemaster treble booster used by Clapton in the Bluesbreakers, Rory Gallagher, Brian May, and Tony Iommi. Cesar Diaz has added treble and gain plus a hi/mid/lo EQ switch not on the original for increased tonal possibilities. Absolute bypass means the Texas Ranger does not affect your signal in any way when turned off. |
 |
Diaz Tremodillo Tremolo : MusiciansFriend : USD224.99Precision controls on the Diaz Tremodillo Tremolo include rate (speed of tremolo), dwell (depth of tremolo), and a speed stomp switch which doubles or halves the tremolo rate. On/off stomp switch and indicator light that flashes with the tremolo pulse. Power jack for external power source or use internal 9V battery. |
 |
Seymour Duncan SFX-06 Paranormal Bass EQ Direct Box : MusiciansFriend : USD139.95While passive DIs proved to be quite useful for recording bass or sending bass to a console for live performance, people began to notice a decrease in overall response and punch. That's when active DI's came to the rescue. But how many are tailored to the response of a bass guitar? The Seymour Duncan SFX-06 Paranormal Bass EQ DI is, featuring a three-band active EQ that's optimized for bass along with a contour switch for slapping styles.Seymour Duncan SFX-06 Paranormal Bass EQ DI, First Take: Active DI with three-band EQ optimized for bass Dedicated contour switch for slapping styles Solid construction, balanced XLR out and ground lift DI with active three-band EQThe three-band EQ allows you to dial in your tone in any room, sculpting your lows, mids, and highs quickly and easily. So, along with performing the normal functions of a DI, you get the benefit of adding an active EQ to your bass without having to make any modifications to your instrument. The EQ provides ±12dB boost and cut for each band, which have center frequencies at 30Hz for deep lows, 650Hz to contour the mids, and 5.2kHz for presence, clarity and attack. Proprietary Slap Contour switch for happy slapping The SFX-6 also features Seymour Duncan's proprietary Slap Contour switch, which applies an additional preset EQ curve. As the name implies, this is a dedicated switch for slapping styles, but it also adds an extra dimension to fingerstyle or pick playing. Slap Contour gives you a 6dB boost at 80Hz to bring out the bottom and cuts 6dB at 650Hz to reduce the mud that can occur in the low mids. The result is a solid low end and more room for attack. By using it with the 3-band EQ, you can bring out more attack information if needed, as well as extra bottom below 80Hz. Solid construction and hum elimination Built like a tank with a 16-guage steel chassis and powered by either a single 9V battery or a regulated DC power supply, the SFX-06 features a balanced XLR output with ground lift to eliminate electromagnetic interference and AC-hum. Between that and its active electronics you can drive longer cable runs to a feed a front-of-house mixing board or a recording console without noise or signal loss. |
 |
Seymour Duncan SFX-05 Lava Box Distortion Pedal : MusiciansFriend : USD99.95The Lava Box is not an ordinary MOSFET distortion/overdrive effect pedal. It actually reacts more like a great amp than a stompbox, with the depth and dynamics that give well-made amps character.When you think about the tones that defined so many of the true guitar heroes throughout history, they all really speak. They cut through. They say something. A huge part of that is in the rich midrange frequencies that the amplifiers of the day naturally produced. And, because those amps were typically cranked up to full volume, they were also incredibly dynamic, responding to different picking attacks and even subtle changes to the guitar's volume control.The Lava Box brings that magic back with its broad array of midrange timbres and its amazing sensitivity to picking intensity and volume changes. One of coolest features is the six-position Rumble bass roll-off control. This rotary knob changes the sonic character of the Lava Box pedal's distortion for a huge range of tones, from bright and spanky to deep and warm. Whether you have the thinnest single-coil in the bridge of your guitar or the woolliest humbucker in the neck, there is a Rumble setting that's perfect for it.Even at the highest gain settings, you can turn down your guitar's volume control and the Lava Box guitar pedal will clean up beautifully. Onstage, you can set the Lava Box for a loud lead tone and simply use your guitar's volume control to get your clean and crunch tones—all without switching channels or kicking in other effects. In the studio, you can explore the huge array of tones that are available with the intuitive controls, creating special-effect thin tones or spooky dark sounds that are perfect for layering and overdubs. |
 |
Line 6 Pocket POD Guitar Multi Effects Processor : MusiciansFriend : USD129.99The Line 6 Pocket POD guitar effects processor is about the size of a hand-held tuner. Yet it's the only personal amp modeling and effects processor packed with over 300 custom presets dialed in by rock stars and professional studio musicians who know great tone. With its 32 classic and modern amp models, 16 cab models, and 16 effects, Pocket POD enables you to create mind-blowing guitar tones wherever inspiration strikes.Just pop in 4 AAA batteries and you are good to go practicing with headphones or jamming with your favorite songs on your MP3 player. Let loose and play it loud with Pocket POD as your multi-effect processor in front of any amp. With Line 6's advanced A.I.R. II technology, you can even use Pocket POD guitar effect as a front-end recording device with the same tone used on countless platinum-selling albums.The Line 6 Pocket POD has a user-friendly design that makes it simple to dial in the tone you're looking for. To customize your sound even more, plug Pocket POD directly into your computer via USB and download the FREE Pocket POD tone editing software from Line6.com. Take your sound to the next level with the Pocket POD processor by connecting to CustomTone.com, the online destination for guitarists. There you can choose from a library of over 3,000 preset tones, create new tones, and share them with guitarists from around the globe. Experience world-class tone in the palm of your hand at an unbeatable price. Make your sound your own. |
 |
Dunlop JH-OC1 Jimi Hendrix Octavio Pedal : MusiciansFriend : USD169.99The JH-OC1 is a true rock 'n roll artifact like Jimi's original guitar pedal. His chipped, off-white, "cheese wedge" pedal with hand stenciled lettering is enshrined at the Experience Music Project, Seattle's hallowed rock and roll museum. Hendrix's octave dividers don't look like much, but these magic boxes produced the unforgettable fuzzed-out octave tones heard on the legendary Band of Gypsys: Live at the Fillmore East performance.Recently a team of Dunlop engineers made a pilgrimage to Seattle to examine and document an original Octavio—the holy grail of octave tone. They measured and scoped with loving care. The result? The Dunlop Jimi Hendrix Octavio is an exact clone of the amazing "octave up" pedal that Jimi used to make rock history.It's all here: every knob and jack, a DPDT on/off switch, and the exact same circuit layout faithfully copied from the original "breadboard," front-panel controls which let you dial in just the right amount of fuzz and adjust overall level. Own a little piece of Jimi—the Dunlop Jimi Hendrix Octavio. |
 |
Dunlop JH-1B Jimi Hendrix Signature Wah Pedal : MusiciansFriend : USD129.99The Jimi Hendrix Signature Wah pedal reproduces the famous tones of Hendrix wah solos and rhythms from the late 60s. The guitar pedal has a classic vintage look to match it's sound: a chrome top and black crinkle aluminum body. Dunlop does it again with great sound and solid construction. |
 |
Dunlop JH-F1 Jimi Hendrix Fuzz Face Pedal : MusiciansFriend : USD149.99The Dunlop Jimi Hendrix Fuzz Face is a meticulously faithful reproduction of the 1969-70 Dallas Arbiter Fuzz Face that Jimi used on classic albums like Band of Gypsys. Dunlop's engineering department examined hoards of vintage Fuzz Faces, honing in on a few units that possessed unmistakable Jimi voodoo.The Hendrix Fuzz Face is built around the toneful BC108 silicon transistor. It is authentic in every detail — a hand wired brown circuit board with no solder mask and circuitry carefully matched to the original specs. The look is 100% accurate too — that groovy circular chassis with tooled clones of the original Fuzz Face knobs in the rare and vintage turquoise hammertone finish.Hendrix was the master of fuzz — an artist with many subtle shadings at his command. His love affair with the legendary Fuzz Face pedal began in the early days of the Experience and continued to evolve throughout his blazing career.A truly playable collectable for any Hendrix or Fuzz Face fanatic. |
 |
Roland PK-7A Foot Pedal : MusiciansFriend : USD1295.00The PK-7A is the ideal foot controller for the VK-77 Combo Organ. This 20-key pedalboard allows for pedal bass control - complete with Pedal Attack and Pedal Sustain functions. |
 |
Tech 21 Boost D.L.A. Analog Delay Emulator Pedal : MusiciansFriend : USD149.00The Boost D.L.A. Analog Delay Emulator Pedal from Tech 21 brings a fresh perspective to the standard delay pedal. By incorporating a clean boost function, up to 9dB, your solos will jump out with greater dimension. The Boost D.L.A. is designed with user-tweakable, "lo-fi" analog technology. By manipulating the controls, you can infuse degrees of warmth and life characteristic of vintage delays. The circuitry intentionally injects the inherent imperfections of vintage units, which is what makes them so seductive and nostalgic. A single, continuously-variable Time control provides a full sweep, up to 1000 milliseconds, of delay. The Boost D.L.A. parameters are engineered so that you can explore and custom tailor such delay styles as digital, vintage tape and bucket brigade. |
 |
Tech 21 Boost R.V.B. Analog Reverb Emulator Pedal : MusiciansFriend : USD149.00With the Boost R.V.B. Analog Reverb Emulator Pedal, Tech 21 brings a fresh perspective to the standard reverb pedal. By incorporating a clean Boost function — up to 9dB — your solos will jump out with greater dimension. The Boost R.V.B. is designed with tweakable, "lo-fi" analog technology. By manipulating the controls, you can infuse degrees of warmth and life characteristic of vintage reverbs. The circuitry intentionally injects the inherent imperfections of vintage units, which is what makes them so seductive and nostalgic. A single, continuously-variable Time control provides a full sweep of size. The Boost R.V.B. parameters are engineered so that you can explore and custom tailor such reverb styles as spring, plate, and natural room/hall ambiance. |
 |
Tech 21 MIDI Moose Footcontroller : MusiciansFriend : USD179.00Whether you're a MIDI-meister or amongst the MIDI-mindless, the Tech 21 MIDI Moose is a super simple, stage-friendly alternative to access 128 patches. Tech21's intuitive engineering eliminates the intimidation of trying to decipher an encyclopedia-sized manual just so you can change a darn program. Like its MIDI Mouse cousin, the MIDI Moose is also battery operable and provides a minimum of 200 hours usage. Its sophisticated battery-saving feature turns off the numerical display after 5 seconds. What if you forget where you were? Just hit the footswitch of the individual patch LED that has remained lit, and it will wake up the display without making any program changes.Housed in a sleek aluminum chassis, there are Up and Down footswitches to select groupings of 5 preset programs. Individual silent-switching, custom actuators instantly engage each program change directly within the selected grouping.Operable with standard 9V alkaline battery (not included), optional power supply (Tech 21 Model #DC2) or phantom power via the MIDI cable. |
 |
Tech 21 ARMD MIDI Converter : MusiciansFriend : USD60.00The Tech 21 ARMD MIDI Converter enables you to control the footswitch functions of Tech 21's Trademark Series of multi-channel guitar amplifiers and Landmark Series of Bass amplifiers with any MIDI controller.Works with Trademark 60, Trademark 120, Trademark 300, Landmark 300, Landmark 600Simply connect a standard 5-pin MIDI cable from the MIDI out on your MIDI controller to the MIDI In of the ARMD. Then connect the 1/4" Out of the ARMD to the 1/4" footswitch jack on the amp you want to control with a standard instrument cable.An additional 1/4" Out is provided on the ARMD if you should want to control two of the same amplifiers.The Tech 21 ARMD is phantom powered through the instrument cable from the footswitch jack on the amplifier, so batteries are not required. A MIDI foot controller transmits information to remotely control anything that accepts MIDI program change information.In order to communicate program change information, the MIDI controller and the ARMD need to be set to the same channel. MIDI channels can be set on the ARMD by accessing six internal DIP switches via the removable back door. |
 |
Tech 21 DD3X Double Drive 3X Distortion Pedal : MusiciansFriend : USD179.00The uniquely designed DD3X Double Drive 3X Distortion Pedal from Tech 21 captures the lush, muscular power amp distortions of both Class A and Class A/B tube amps. The tones can be used individually or you can feed one into the other for massive cascading' distortion and limitless tonal variations. The 100% analog Double Drive 3X is a 3-channel, fully programmable version of its single channel predecessor and features active 3-band EQ. The expanded tone section gives you even greater flexibility to create incredible and original tones. You can store three custom sounds, even on the fly, by simply tweaking the knobs and double-tapping on a footswitch. How easy is that? And, with both Drives at minimum, you can program a clean boost up to 10dB for blazing solos.DRIVE A controls the amount of Class A power amp output stage distortion (like Vox AC30®-style amp), rich in even harmonics. The amount of harmonics is dynamically controlled by the input level and their ratio by how hard you pick.DRIVE A/B controls the amount of Class A/B power amp output stage distortion (like Fender®/Marshall®-style amps), rich in odd harmonics.The signal path of Drive A runs into the signal path of Drive A/B. This results in an electronic multiplication, rather than addition, of the amount of distortion to achieve a cascading effect. |
 |
C Tech Pocket Rock-It V1 Guitar Headphone Amp : MusiciansFriend : USD49.95The |